Cisco IP Phone with ACM 3.1

m777erlin · March 16th, 2006, 08:31 AM

I recently obtained a Cisco CP-7970G IP Phone and was going to try to get it to work with my 8710/3.1. Does anyone have any experience with Cisco IP phones working with the MedPro or any advice they would like to share. I've heard it can be done but have not tried as of yet.

I've heard that ACM 3.1 includes proprietary Cisco SIP MWI protocol and you simply download Cisco SIP firmware to the TFTP server and reboot the phone and it will come up as SIP.

Thanks!

Ebuy · October 5th, 2006, 01:42 PM

Hi.
Visit this link:
http://support.avaya.com/elmodocs2/s...co7960SIPc.pdf
On Support Avaya there is a lot of documentation...

Bye

March 16th, 2006, 08:31 AM	#1 (permalink)
m777erlin PBXtech SILVER 25+ posts Join Date: Feb 2004 Posts: 25	Cisco IP Phone with ACM 3.1 I recently obtained a Cisco CP-7970G IP Phone and was going to try to get it to work with my 8710/3.1. Does anyone have any experience with Cisco IP phones working with the MedPro or any advice they would like to share. I've heard it can be done but have not tried as of yet. I've heard that ACM 3.1 includes proprietary Cisco SIP MWI protocol and you simply download Cisco SIP firmware to the TFTP server and reboot the phone and it will come up as SIP. Thanks!

October 5th, 2006, 01:42 PM	#2 (permalink)
Ebuy Join Date: Nov 2003 Posts: 5	Re: Cisco IP Phone with ACM 3.1 Hi. Visit this link: http://support.avaya.com/elmodocs2/s...co7960SIPc.pdf On Support Avaya there is a lot of documentation... Bye

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)