Resetting a 9650

[btrain2871]

How do I reset an 9650 IP phone? mute reset isn't working.

[AvayaTier3]

Use the link below and search for restart and reset.
Note that there are major differences. restart does not wipe out all of the programming.

http://support.avaya.com/elmodocs2/9600/16_603159_1.pdf

Use the following procedure to restart the telephone.
1. Invoke RESTART by pressing the

Mute button.
2. Enter the local (dialpad) procedure password (0 to 7 numeric digits), then press the #

button.

Note:

Note:

A 6-second timeout is in effect between button presses. If you do not press a
valid button within 6 seconds of pressing the previous button, the collected digits
are discarded. In this case, no administrative option is invoked.

The entry is compared to the PROCPSWD value. If they match, the telephone displays the
Craft Local Procedure screen and prompts “Select procedure and press Start.”

3. Use the navigation arrows to scroll to and highlight

RESTART PHONE, then press Select

or

OK. Or on a 9630 SIP IP Telephone, scroll to RESTART PHONE and press the
corresponding line button.
4. When you select RESTART PHONE from the Admin Procedure Screen, the telephone

displays a confirmation screen asking if you are sure you want to perform a restart.