Partner 6.0

smithermang · July 15th, 2003, 10:45 AM

Has anyone installed the Partner 6.0? I think there will be a big market for it with the T1 module.

tom · July 15th, 2003, 12:15 PM

I personally have not but see a lot of comments about the Partner system here:

removed URL

TouchToneTommy · July 15th, 2003, 06:31 PM

6.0 is what is shipping now, so I have put in a few. The only thing I saw new while stepping through the menus from Ext. 10 was the Hold Recall Time. The T1 parameters have to be programmed from the R6 remote administration software.

The only problem with the T1 is finding a carrier that will provide a fractional T1. SBC/Pacific Bell doesn't offer it here in Calif. Some CLECs might do it, probably offering the customer Internet access with the left-over channels.

smithermang · July 16th, 2003, 07:03 AM

Thanks for the info!!

smithermang · July 17th, 2003, 10:43 AM

Partner 6.0 has T1 module, DID Service and Unified Messaging. Looks like Avaya is trying to make a PBX out of it.

Phone dude · August 13th, 2003, 03:22 PM

Has anyone installed a DSL card? Wasnt even sure that ISP's were using DSL with frame relay.

Phone dude · August 14th, 2003, 08:27 PM

What would the purpose of the T1 card be? Most carriers dont carry fractional T1's. Why not go with the cheaper frame over dsl?

July 15th, 2003, 10:45 AM	#1 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Partner 6.0 Has anyone installed the Partner 6.0? I think there will be a big market for it with the T1 module.

August 13th, 2003, 03:22 PM	#6 (permalink)
Phone dude Moderator Join Date: Jun 2003 Posts: 305 Blog Entries: 1	Has anyone installed a DSL card? Wasnt even sure that ISP's were using DSL with frame relay. __________________ www.telemanuals.com

August 14th, 2003, 08:27 PM	#7 (permalink)
Phone dude Moderator Join Date: Jun 2003 Posts: 305 Blog Entries: 1	What would the purpose of the T1 card be? Most carriers dont carry fractional T1's. Why not go with the cheaper frame over dsl? __________________ www.telemanuals.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Partner Messaging R6.0/7.0	magens	Partner Systems	0	May 16th, 2005 07:10 AM
Global Avaya Business Partner	CP10	Vendors (Discussion and Advertisments)	0	January 7th, 2005 09:17 AM
Partner dropping inbound calls	bryanfarrish	Partner Systems	4	August 18th, 2004 07:15 AM
Partner "General Mailbox"	mnickasch	Partner Systems	1	March 3rd, 2004 10:30 AM
Wiring a Partner System - RJ45?	mnickasch	Partner Systems	7	February 16th, 2004 07:56 AM

July 15th, 2003, 12:15 PM	#2 (permalink)
tom Join Date: Jul 2003 Posts: 7	I personally have not but see a lot of comments about the Partner system here: *removed URL*

Remove advertisements Sponsored links
PBXtech.info Advertisement

July 15th, 2003, 06:31 PM	#3 (permalink)
TouchToneTommy PBXtech SILVER 25+ posts Join Date: May 2003 Posts: 81	6.0 is what is shipping now, so I have put in a few. The only thing I saw new while stepping through the menus from Ext. 10 was the Hold Recall Time. The T1 parameters have to be programmed from the R6 remote administration software. The only problem with the T1 is finding a carrier that will provide a fractional T1. SBC/Pacific Bell doesn't offer it here in Calif. Some CLECs might do it, probably offering the customer Internet access with the left-over channels.

July 16th, 2003, 07:03 AM	#4 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Thanks for the info!!

July 17th, 2003, 10:43 AM	#5 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Partner 6.0 has T1 module, DID Service and Unified Messaging. Looks like Avaya is trying to make a PBX out of it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)