ppattanayak

Hi,
Can any body help me out how can i configure Norstar PBX with spectralink TGD116 gateway.

My setup details are as bellow.
Wireless phones--------AP-------Wireless controller------Spectralink GW------Norstar PBX.
I am confised with how to configure the PBX.
I am not getting the dial tone ,i am not able to figure out how to get dial tone.

Thanks
Prashanta

nazule

I have not installed a spectralink but have worked on MICS units that had them installed, from what I saw the module hooks up to your STN module port for port and should show up as M7208's or M7310's if memory serves.

So the GW connects to the KSU via port to port cross connects. Once that is done and the GW is up you should see the ports as active phones. If not make sure your Station module is working properly with any phone, if it is then try rebooting your Spectra Gateway. If that fails I'm out of ideas.

__________________
Not your average bear.

PBXtech.info