t1 channel testing

payton · November 28th, 2003, 08:09 PM

I haven't done this ever before. I am installing a system for a customer who shipped a Magix that was already programmed. The t1 has voice channels 1 thru 17 for voice;
18-22 for spare and 23/24 for data. How do I test the 17 channels after I hang it and plug it in to the new t1?
THANKS

Cephas · December 1st, 2003, 11:32 AM

Quote:

Originally Posted by payton

I haven't done this ever before. I am installing a system for a customer who shipped a Magix that was already programmed. The t1 has voice channels 1 thru 17 for voice;
18-22 for spare and 23/24 for data. How do I test the 17 channels after I hang it and plug it in to the new t1?
THANKS

If it was properly configured for the T1 you're going to be connecting it to, in a perfect world you should be able to simply make a phone call to test it. If there are other (analog perhaps) trunks on the system I would allow a test phone direct access to the pool the T1 trunks are part of so you can ensure you're dialing out on the T1 lines.

Is there drop/insert equipment going between the Magix and the T1? Or is this being done with an INA board?

Cephas

November 28th, 2003, 08:09 PM	#1 (permalink)
payton PBXtech GOLD 100+ posts Join Date: Apr 2003 Posts: 121	t1 channel testing I haven't done this ever before. I am installing a system for a customer who shipped a Magix that was already programmed. The t1 has voice channels 1 thru 17 for voice; 18-22 for spare and 23/24 for data. How do I test the 17 channels after I hang it and plug it in to the new t1? THANKS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Data bandwidth on shared T1	nhammer	Definity Servers	1	May 19th, 2005 02:40 PM
G3V6 TN464F PRI D Channel Problem	jaiello2000	Definity Servers	14	September 1st, 2004 11:28 AM
point-to-point T1	payton	Meridian systems	3	April 20th, 2004 04:08 PM
T1 channel issue. Need advice.	redG	Meridian systems	1	April 14th, 2004 07:31 PM
Long Distance T1 vs Local T1	tek	Definity Servers	3	February 10th, 2004 06:45 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)