Magix processor won't go Hybrid/PBX Mode

redG · October 6th, 2003, 02:02 PM

I cannot set a Magix R3.0 V7.0 processor to Hybrid/PBX or Key mode.
It is stuck in behind the switch mode.

When I select Hybrid mode, it just beeps and does not respond. When
I select Key mode, it highlights it and restarts, but it comes back
in Behind the Key mode.

I have tried from both the console and WinSPM. I have erased the
system several times. Nothing is working.

Has anyone tackled this before? If so, how did you get it to work?

Cephas · October 8th, 2003, 10:49 AM

Never encountered this, but I would try taking any backup file you have from another system that's in hybrid mode, upgrade it to R3 if needed, and upload that to the processor. I would expect that to take, then doing a full default from there may solve it.

Let us know how you do with this - now I'm curious.

Cephas

Quote:

Originally Posted by redG

I cannot set a Magix R3.0 V7.0 processor to Hybrid/PBX or Key mode.
It is stuck in behind the switch mode.

When I select Hybrid mode, it just beeps and does not respond. When
I select Key mode, it highlights it and restarts, but it comes back
in Behind the Key mode.

I have tried from both the console and WinSPM. I have erased the
system several times. Nothing is working.

Has anyone tackled this before? If so, how did you get it to work?

DUDE · October 8th, 2003, 02:11 PM

WOULD IT BE SILLY TO ASK IF YOU HAVE VISITED THE DIP SETTINGS?

DUDE · October 8th, 2003, 02:17 PM

WOULD ITBE SILLY TO ASK IF YOU VISTSED THE DIP SETTINGS?

Quote:

Originally Posted by DUDE

WOULD IT BE SILLY TO ASK IF YOU HAVE VISITED THE DIP SETTINGS?

Cephas · October 9th, 2003, 07:59 AM

Quote:

Originally Posted by DUDE

WOULD ITBE SILLY TO ASK IF YOU VISTSED THE DIP SETTINGS?

Not as silly as it might appear on the surface. You can briefly remove the jumper near the caps (batteries) on the processor board to hard default the board - I've had tech support advise me to do that once for a board that was acting wonky when the normal default procedure wasn't clearing it up.

Suggest you give it a try.

flaphat · January 9th, 2004, 10:47 AM

Quote:

Originally Posted by redG

I cannot set a Magix R3.0 V7.0 processor to Hybrid/PBX or Key mode.
It is stuck in behind the switch mode.

When I select Hybrid mode, it just beeps and does not respond. When
I select Key mode, it highlights it and restarts, but it comes back
in Behind the Key mode.

I have tried from both the console and WinSPM. I have erased the
system several times. Nothing is working.

Has anyone tackled this before? If so, how did you get it to work?

Remove the Processor and look for a bank of 2 dip switches. It is located at the back of the card where it makes contact to the backplane make sure the dips are in the OPEN possition (upwards)

flaphat · January 9th, 2004, 11:14 AM

Remove Processor and look for 2 dip switches close to the backplane of the card. These dip should be in the open possition or upwards. Fix it and enjoy your Hybrid/PBX mode.

October 6th, 2003, 02:02 PM	#1 (permalink)
redG PBXtech SILVER 25+ posts Join Date: Aug 2003 Posts: 98	Magix processor won't go Hybrid/PBX Mode I cannot set a Magix R3.0 V7.0 processor to Hybrid/PBX or Key mode. It is stuck in behind the switch mode. When I select Hybrid mode, it just beeps and does not respond. When I select Key mode, it highlights it and restarts, but it comes back in Behind the Key mode. I have tried from both the console and WinSPM. I have erased the system several times. Nothing is working. Has anyone tackled this before? If so, how did you get it to work?

October 8th, 2003, 02:11 PM	#3 (permalink)
DUDE PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 33	Re: Magix processor won't go Hybrid/PBX Mode WOULD IT BE SILLY TO ASK IF YOU HAVE VISITED THE DIP SETTINGS?

January 9th, 2004, 11:14 AM	#7 (permalink)
flaphat Join Date: Jan 2004 Posts: 2	Re: Magix processor won't go Hybrid/PBX Mode Remove Processor and look for 2 dip switches close to the backplane of the card. These dip should be in the open possition or upwards. Fix it and enjoy your Hybrid/PBX mode.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Option 61C Split Mode	niemannl	Meridian systems	5	April 24th, 2006 03:05 PM
magix w/supertrunk	tweege	Merlin Systems	3	December 6th, 2004 10:22 AM
VoIP Compression Mode	rdahl	IP Office	3	October 27th, 2004 08:49 AM
Change from Intuity Mode to IP Office Mode	payton	IP Office	2	February 25th, 2004 11:36 AM
Magix vs NorStar	fedphone	Partner Systems	1	December 24th, 2003 11:29 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)