How do you add music to a Legend system?

mtfs · June 28th, 2003, 10:51 PM

How and what do you need to add music to a Legend system?

phoneguy15 · June 30th, 2003, 08:22 AM

mtfs,
MOH must be connected to a trunk port. Go into system programming "exit", "auxEquip", "MusicOnHold", assign the port "8xx", enter. This programming will busy out the system, so you may want to alert everyone that it is coming or do it after hours.
then just connect the source to the trunk port and set your volume.
-Todd

patrick · February 4th, 2006, 04:09 PM

I've been trying to setup MOH on a merlin legend with an external tape desk music system, I have the adapter from Lucent(given the vintage) that goes from rca to rj-11. I have it plugged into port 809 and assigned the music on hold source to 809 but when I call in from the outside or from within the shop I cannot hear anything. Am I missing anything?

TouchToneTommy · February 5th, 2006, 08:24 PM

If you are using a "line out" from the tape deck, it is not a "strong" enough signal. Use a headphone output, with the volume cranked up.

patrick · February 11th, 2006, 04:45 PM

Yep, that fixed it.

June 28th, 2003, 10:51 PM	#1 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	How do you add music to a Legend system? How and what do you need to add music to a Legend system?

June 30th, 2003, 08:22 AM	#2 (permalink)
phoneguy15 Join Date: Jun 2003 Posts: 4	mtfs, MOH must be connected to a trunk port. Go into system programming "exit", "auxEquip", "MusicOnHold", assign the port "8xx", enter. This programming will busy out the system, so you may want to alert everyone that it is coming or do it after hours. then just connect the source to the trunk port and set your volume. -Todd __________________ Todd

February 4th, 2006, 04:09 PM	#3 (permalink)
patrick Join Date: Jul 2005 Posts: 11	Re: How do you add music to a Legend system? I've been trying to setup MOH on a merlin legend with an external tape desk music system, I have the adapter from Lucent(given the vintage) that goes from rca to rj-11. I have it plugged into port 809 and assigned the music on hold source to 809 but when I call in from the outside or from within the shop I cannot hear anything. Am I missing anything?

February 5th, 2006, 08:24 PM	#4 (permalink)
TouchToneTommy PBXtech SILVER 25+ posts Join Date: May 2003 Posts: 88	Re: How do you add music to a Legend system? If you are using a "line out" from the tape deck, it is not a "strong" enough signal. Use a headphone output, with the volume cranked up.

February 11th, 2006, 04:45 PM	#5 (permalink)
patrick Join Date: Jul 2005 Posts: 11	Re: How do you add music to a Legend system? Yep, that fixed it.

Remove advertisements Sponsored links
PBXtech.info Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speed Dial in Opton 61c	smt	Meridian systems	6	March 24th, 2006 11:18 AM
Add NIC to Audix R3 to use with system mngr?	ceez	Definity Servers	1	August 27th, 2005 08:28 AM
Music On Hold	Nick Ball	IP Office	1	April 16th, 2004 05:43 AM
Help with Merlin Legend Mail	dsnover	Merlin Systems	8	February 25th, 2004 02:36 PM
System 75 System Console	tschimpf	Definity Servers	4	January 20th, 2004 03:40 PM