WinSPM

smithermang · June 20th, 2003, 10:31 AM

I recently downloaded WinSPM 8.0 patch from the Avaya Web Site. Since I've done this, my WinSPM has been having issues like passwords not being recognized. Has anyone else experienced this?

mtfs · June 26th, 2003, 04:37 PM

Not trying to be smart, but after 25years in this business i always go by the motto - if it's not broken - don't fix it....

 

 

smithermang · June 26th, 2003, 04:38 PM

Amen!

phoneguy15 · June 30th, 2003, 03:52 PM

I know that in an earlier version of WinSPM they had a problem with an intermittent caps being put into the type.
I had changed the password to a system using WinSPM on a location and it came as "XxxXxX" instead of all lower case.
Perhaps they have recreated the problem in this latest version.
I don't suppose that this is a local system that you could connect to directly is it?
If it is you can print out the password.

smithermang · June 30th, 2003, 04:08 PM

Direct connect is no problem. The only problem is logging on remotely.

Relentless · February 26th, 2004, 08:09 AM

Quote:

Originally Posted by mtfs

Not trying to be smart, but after 25years in this business i always go by the motto - if it's not broken - don't fix it....

 

 

But win spm was always broken

avayatech · March 3rd, 2004, 10:51 AM

Quote:

Originally Posted by Relentless

But win spm was always broken

only use winspm in you need to convert a backup for an upgrade, otherwise, use dos spm.

Cephas · March 3rd, 2004, 12:28 PM

Quote:

Originally Posted by avayatech

only use winspm in you need to convert a backup for an upgrade, otherwise, use dos spm.

I like WinSPM because it keeps all your customers in seperate folders, so you can lug your laptop around site to site and print reports, then always be able to refer to them later. I run it in Standard SPM mode and ignore the stupid GUI stuff (except station responding test which can be handy when searching for a free port)

Cephas

June 20th, 2003, 10:31 AM	#1 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	WinSPM I recently downloaded WinSPM 8.0 patch from the Avaya Web Site. Since I've done this, my WinSPM has been having issues like passwords not being recognized. Has anyone else experienced this?

June 26th, 2003, 04:37 PM	#2 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	Words of wisdom Not trying to be smart, but after 25years in this business i always go by the motto - if it's not broken - don't fix it....

June 30th, 2003, 03:52 PM	#4 (permalink)
phoneguy15 Join Date: Jun 2003 Posts: 4	I know that in an earlier version of WinSPM they had a problem with an intermittent caps being put into the type. I had changed the password to a system using WinSPM on a location and it came as "XxxXxX" instead of all lower case. Perhaps they have recreated the problem in this latest version. I don't suppose that this is a local system that you could connect to directly is it? If it is you can print out the password. __________________ Todd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with Remote Connection using WinSPM	jkurzner	Merlin Systems	3	September 2nd, 2005 06:31 PM
WinSpm	amgad	Merlin Systems	3	April 1st, 2005 01:06 PM
winspm	cww30040	Merlin Systems	0	January 24th, 2005 11:25 AM
winSPM	blm1411	Merlin Systems	3	January 13th, 2005 03:50 PM
Adding an area code in Merlin WinSPM	mmuntel	Merlin Systems	1	October 6th, 2004 09:25 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

June 26th, 2003, 04:38 PM	#3 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Amen!

June 30th, 2003, 04:08 PM	#5 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Direct connect is no problem. The only problem is logging on remotely.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)