print list of DID's ?

mtwest · July 12th, 2006, 02:31 AM

hi all, just wondering if its possible to print a list of DID 's (indials) and what TN they are pathed to. i used to use switchview (avotus -intellicontrol) but moved companies... about the only time i ever wish i had the clunky old switchview system back ;)

cheers

Colin · July 12th, 2006, 11:00 AM

LD 21
req=ltm
cust x
rout = c/r

also look for any treatment with the in / coming numbers

LD 49
req=prt
type=idc
cust x
c/r till it prints

mtwest · July 12th, 2006, 05:35 PM

thanks heaps for that colin, just to confirm, this will print out a list of all of our indial range (numbers that are configured) and where they point to?

is the "cust x" a wildcard type command?

what did you mean by "treatment"?

sorry im pretty new to pbx programming
ill go give it a go!

cheers ;)

Colin · July 13th, 2006, 01:47 AM

yes, providing the install guys detaled the setup on the meridian

have a look

you normaly enter 0 (zero) at the cust prompt

LTM will list you trunk members (LIST TRUNK MEMBERS)

IDC will list number conversion (INCOMING DIGIT CONVERSION)

jhmccoy · July 13th, 2006, 08:15 AM

I may have mis-understood your question but I read it as you want to print the DID phone numbers that are assigned to sets. LTM will print the trunk members for your routes.

To print the DN's assigned to sets and other features:

LD 20
req prt
type dnd
cust (most of the time this will be 0 unless you have a more then one customer on the switch)
dn (you can input a single DN or just hit return to print all DN's)
just hit return on the next few prompts.

You may want to make sure you have a printer hooked up as this can be a long print out. I recommend you use a communications program (like ProComm) so you can capture the data as as a file as the system display it on the screen.

mtwest · July 20th, 2006, 05:54 PM

thanks heaps.... both answers were very useful :)

mjamm · July 22nd, 2006, 01:33 AM

LD 20

REQ: Prt
TYPE: DNB

Will print out all out your DN's in the switch and the Prt - LUDN will print all your unused DN's, but neither will not show your DID's only, but all DN's.

nazule · August 25th, 2006, 12:03 PM

If you want to narrow down your search of DID's to TN I recommend doing a text capture of your DNB and starting your DNB with the lead digit of your DID range. Lets say your DID range is 4 digits from the CO and it starts with 8. 8100 to 8199
eg:
PRT
DNB
0
81

The file you get will be every 81xx number and the TN they are on.

If you don't actually have your DID range the only concreat way to get the proper range is from your Telco.

hope that speeds it up.
Brett

July 12th, 2006, 02:31 AM	#1 (permalink)
mtwest Join Date: Jul 2006 Posts: 5	print list of DID's ? hi all, just wondering if its possible to print a list of DID 's (indials) and what TN they are pathed to. i used to use switchview (avotus -intellicontrol) but moved companies... about the only time i ever wish i had the clunky old switchview system back ;) cheers

July 12th, 2006, 11:00 AM	#2 (permalink)
Colin PBXtech SILVER 25+ posts Join Date: Feb 2004 Posts: 86	Re: print list of DID's ? LD 21 req=ltm cust x rout = c/r also look for any treatment with the in / coming numbers LD 49 req=prt type=idc cust x c/r till it prints

July 12th, 2006, 05:35 PM	#3 (permalink)
mtwest Join Date: Jul 2006 Posts: 5	Re: print list of DID's ? thanks heaps for that colin, just to confirm, this will print out a list of all of our indial range (numbers that are configured) and where they point to? is the "cust x" a wildcard type command? what did you mean by "treatment"? sorry im pretty new to pbx programming ill go give it a go! cheers ;)

July 13th, 2006, 01:47 AM	#4 (permalink)
Colin PBXtech SILVER 25+ posts Join Date: Feb 2004 Posts: 86	Re: print list of DID's ? yes, providing the install guys detaled the setup on the meridian have a look you normaly enter 0 (zero) at the cust prompt LTM will list you trunk members (LIST TRUNK MEMBERS) IDC will list number conversion (INCOMING DIGIT CONVERSION)

July 13th, 2006, 08:15 AM	#5 (permalink)
jhmccoy PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 61	Re: print list of DID's ? I may have mis-understood your question but I read it as you want to print the DID phone numbers that are assigned to sets. LTM will print the trunk members for your routes. To print the DN's assigned to sets and other features: LD 20 req prt type dnd cust (most of the time this will be 0 unless you have a more then one customer on the switch) dn (you can input a single DN or just hit return to print all DN's) just hit return on the next few prompts. You may want to make sure you have a printer hooked up as this can be a long print out. I recommend you use a communications program (like ProComm) so you can capture the data as as a file as the system display it on the screen.

Remove advertisements
PBXtech.info Advertisement	Sponsored links

July 20th, 2006, 05:54 PM	#6 (permalink)
mtwest Join Date: Jul 2006 Posts: 5	Re: print list of DID's ? thanks heaps.... both answers were very useful :)

July 22nd, 2006, 01:33 AM	#7 (permalink)
mjamm Join Date: Dec 2003 Posts: 24	Re: print list of DID's ? LD 20 REQ: Prt TYPE: DNB Will print out all out your DN's in the switch and the Prt - LUDN will print all your unused DN's, but neither will not show your DID's only, but all DN's.

August 25th, 2006, 12:03 PM	#8 (permalink)
nazule PBXtech SILVER 25+ posts Join Date: Aug 2006 Posts: 70	Re: print list of DID's ? If you want to narrow down your search of DID's to TN I recommend doing a text capture of your DNB and starting your DNB with the lead digit of your DID range. Lets say your DID range is 4 digits from the CO and it starts with 8. 8100 to 8199 eg: PRT DNB 0 81 The file you get will be every 81xx number and the TN they are on. If you don't actually have your DID range the only concreat way to get the proper range is from your Telco. hope that speeds it up. Brett

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode