How do you block an area code in the switch?

ctech1 · June 9th, 2006, 12:54 PM

Hello-

Just now learning and i need assistance on how to block an NPA such as 876 for the entire switch....

Thanks!
ctech

Colin · June 9th, 2006, 01:13 PM

do you mean block users from dialling 876 ?

ctech1 · June 9th, 2006, 01:14 PM

Yes. I want to block them from dialing 1876

Colin · June 9th, 2006, 02:38 PM

look at the ncos of a set then goto LD 49 and prt type fcr
the ncos will relate to a tree number ie ncos 3 points to crno 3
do a change and deny1876

ctech1 · June 9th, 2006, 02:49 PM

Thanks for the help, but can you tell me what to enter for TYPE etc...after i locate the ncos.

I really appreciate the HELP!

Colin · June 9th, 2006, 03:53 PM

OK

LD 49
req=prt
type=fcr
cust
crno ( enter for all)
look for your tree eg ncos 3 crno 3
then make the changes
ld 49
req chg
type fcr
cust
crno x
init deny
alow (cr)
deny 1876
cr till req

try that

ctech1 · June 9th, 2006, 04:21 PM

Thanks a million! I got it now!

June 9th, 2006, 12:54 PM	#1 (permalink)
ctech1 Join Date: Jun 2006 Posts: 8	How do you block an area code in the switch? Hello- Just now learning and i need assistance on how to block an NPA such as 876 for the entire switch.... Thanks! ctech

June 9th, 2006, 01:13 PM	#2 (permalink)
Colin PBXtech SILVER 25+ posts Join Date: Feb 2004 Posts: 86	Re: How do you block an area code in the switch? do you mean block users from dialling 876 ?

June 9th, 2006, 01:14 PM	#3 (permalink)
ctech1 Join Date: Jun 2006 Posts: 8	Re: How do you block an area code in the switch? Yes. I want to block them from dialing 1876

June 9th, 2006, 02:38 PM	#4 (permalink)
Colin PBXtech SILVER 25+ posts Join Date: Feb 2004 Posts: 86	Re: How do you block an area code in the switch? look at the ncos of a set then goto LD 49 and prt type fcr the ncos will relate to a tree number ie ncos 3 points to crno 3 do a change and deny1876 Last edited by Colin; June 10th, 2006 at 02:54 AM.

June 9th, 2006, 02:49 PM	#5 (permalink)
ctech1 Join Date: Jun 2006 Posts: 8	Re: How do you block an area code in the switch? Thanks for the help, but can you tell me what to enter for TYPE etc...after i locate the ncos. I really appreciate the HELP!

Remove advertisements
PBXtech.info Advertisement	Sponsored links

June 9th, 2006, 03:53 PM	#6 (permalink)
Colin PBXtech SILVER 25+ posts Join Date: Feb 2004 Posts: 86	Re: How do you block an area code in the switch? OK LD 49 req=prt type=fcr cust crno ( enter for all) look for your tree eg ncos 3 crno 3 then make the changes ld 49 req chg type fcr cust crno x init deny alow (cr) deny 1876 cr till req try that

June 9th, 2006, 04:21 PM	#7 (permalink)
ctech1 Join Date: Jun 2006 Posts: 8	Re: How do you block an area code in the switch? Thanks a million! I got it now!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode