niemannl

I am working on cleaning up an option 11c. All Route's, NXX, NPA, SPN, RLI, DGT, TN's (except for the DTR's) DN's (almost all) have been removed but I am having a few issue completing the cleanup. Right now the system sits as a single cabinet with only the SSC. I am having the following issues

How do I get rid of the PRI buildout :

PRI* TRK LOOP 1 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
DTI TRK LOOP 5 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
DTI TRK LOOP 6 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
.


Where do I go to kill an SFP , LDN, and a ATT.


DN 1
TYPE SFP

DN 6190
TYPE LDN

DN 6191
TYPE ATT


How do I get rid of the last two ACD's (there are no members to them)

REQ out
TYPE acd
CUST 0
ACDN 7700
SCH0725

DN 7700
TYPE ACDN

DN 7750
TYPE ACDN


Any help would be apriciated. Thanks

David

To get rid of the PRI buildout you should be able to get rid of them in LD 17
LD 17
Type CEQU
DLOP X1
DLOP X5
DLOP X6

LD 15
REQ Prt
TYPE LDN_DATA

then out the LDN

Req Chg
TYPE LDN_DATA
CUST
OPT
LDN x

LD 15
REQ PRT
TYPE ATT_DATA

LD 15
REQ CHG
TYPE ATT_DATA
ATDN X6191

I could not find out how to out SFP or the how to locate the pther ACD members..

Do you know how to chg the leading number in a default database of an option 11C using the admin telephone? We just fired up our Opt 11C and chose to go with the default database. But I can't seem to change the leading Directory number fromm 2200 to 6200 using a 2616 phone as an admin phone

PBXtech.info

 

bmessinwu

The easiest way to clean up an OP11 is to get a copy of the software off of the nortel's website format a PCMCIA card and load the software on there. Place the PCMCIA card in the SSC card slot A and go to load 143. Type in "upgrade" enter and then go to Utilities and get the current system record. Then reload the system with software card. It would be good to go to ld 22 first and get the TID, SLT, and ISSP. The SLT should give you the keycodes.

On the other hand the stuff you are looking for is in LD 15 you can print it in LD 21.