maykerperez

Hello people, I have two connects the A and the B in the A I have IP office 403 and in the B small Office In the B I then do not have Anolog trunk is no service in that town, and I want to use anolog trunk from the site A for making calls I am making the connection via one wirless LAN. please how I do that.
tell my how I can make Thanks step by step.
Greetings to all!

__________________
puede alguin decirme como tomar troncales analogas desde un sitio remoto.
Ejemplo: tengo en el lado A ip office 403 con troncaless analoga y del otro extremo el lado B el tengo un Small office conectados atravez de un enlace wirless y quiero tomar troncales para hacacer llamadas salientes del sitio A. tomando las troncales del sitio A Desde el sitio B en el sitio B no tengo troncales
Como hago este asaña. :D
Gracias
Saludos!

DaveA

You will need to install a VCM module in the 403, then create an IP trunk on both systems, pointed to each other and then on the SOE change the Short code ? to dial out on the IP trunks rather than the default trunk outgoing IDs.

__________________
------------------------------------------------------------------------------------
Click -->UK IP Office Forum. A new UK based IP Office User Group.

PBXtech.info

 

maykerperez

have a vcm ,and can call to exencion A To B but cant take analog trunk for out going call of remote site (A) because B no have analog trunk but A yess, have analog trunk.
Step by step tell my please
thanks!!

__________________
puede alguin decirme como tomar troncales analogas desde un sitio remoto.
Ejemplo: tengo en el lado A ip office 403 con troncaless analoga y del otro extremo el lado B el tengo un Small office conectados atravez de un enlace wirless y quiero tomar troncales para hacacer llamadas salientes del sitio A. tomando las troncales del sitio A Desde el sitio B en el sitio B no tengo troncales
Como hago este asaña. :D
Gracias
Saludos!

corhavelaar

I'll try step by step :

Site A has alog lines, i assume linegroup 0.
Site A has VPN Trunk, i assume linegroup 1.
Site B has VPN Trunk, i assume linegroup2.

I assume you dial a 9 for external calls.

Set the following in Site A in the System -> telephony tab:
Dial delay time = 3000
Dial delay count = empty

Create system shortcodes :
SC = 9
TN = .
Linegroup = 0
Function = SecondaryDialTone

SC = [9]N;
TN = N
Linegroup = 0
function = dial

Create a shortcode in VPN Line 1:
SC = 9N
TN = N
Linegroup = 0
Function = dial

Set the following in Site B in the System -> telephony tab:
Dial delay time = 3000
Dial delay count = empty

Create system shortcodes :
SC = 9
TN = .
Linegroup = 0
Function = SecondaryDialTone

SC = [9]N;
TN = 9N
Linegroup = 2
Function = Dial

If you dial from Site A a 9 you dial tone and can dial the external number, the number will only be send to your linegroup if the Dial delay timer has exceeded.
If you dial from Site B a 9 you will get dial tone and you can dial the exteranl number, the number will only be send over the VPN line until the Dial Delay timer has exceeded. The complete number will arrive on VPN line 1 on Site A and because it starts with a 9 it will break-out over the linegroup 0 without the additional 9 you put in on site B.

If you wish to do it without secondary dial tone then do not make the shortcodes with the function secondary dial tone and omit the brackest in all other shortcodes.

Hope it helps you.