Outgoing speach amplifier

George · March 14th, 2005, 11:01 AM

Hello all,

I know there are devices out there that can amplify phone calls so the other party can hear you more loudly. But, can my IPO 412 do this?

I've had a look in Manager, but can't seem to see anything obvious.

Thanks.

G!

mallgood · March 14th, 2005, 04:46 PM

There are gains you can set in the line options for each individual line. The problem comes if you need to do in on a user by user basis. Eg 1 user talks loud, another talks soft and you are trying to equalize them.

To change the gains:
on an analog line
click the Analog Tab
and change the value in Gains - TX and RX

Similar on PRI, etc
Select the channel in the PRI
Change the TX Gain and RX Gain.

I haven't ever used these, so I'm not sure on any cavaets or problems.
Anyone?

George · March 15th, 2005, 02:56 AM

Thanks for the info, I'll look into that.

But, as you said, we're going to need a solution whereby individual users can boost the volume to the customer, but not to all customers.

Is there any third party devices anyone can recommend?

Thanks.

G!

DaveA · March 15th, 2005, 10:35 AM

Hi George
Are you in the UK?
If so try here http://www.sarabec.com/telecoms.asp?cat=7
Cheers

March 14th, 2005, 11:01 AM	#1 (permalink)
George PBXtech SILVER 25+ posts Join Date: Jan 2005 Posts: 59	Outgoing speach amplifier Hello all, I know there are devices out there that can amplify phone calls so the other party can hear you more loudly. But, can my IPO 412 do this? I've had a look in Manager, but can't seem to see anything obvious. Thanks. G!

March 14th, 2005, 04:46 PM	#2 (permalink)
mallgood PBXtech SILVER 25+ posts Join Date: Apr 2004 Posts: 40	Re: Outgoing speach amplifier There are gains you can set in the line options for each individual line. The problem comes if you need to do in on a user by user basis. Eg 1 user talks loud, another talks soft and you are trying to equalize them. To change the gains: on an analog line click the Analog Tab and change the value in Gains - TX and RX Similar on PRI, etc Select the channel in the PRI Change the TX Gain and RX Gain. I haven't ever used these, so I'm not sure on any cavaets or problems. Anyone?

March 15th, 2005, 02:56 AM	#3 (permalink)
George PBXtech SILVER 25+ posts Join Date: Jan 2005 Posts: 59	Re: Outgoing speach amplifier Thanks for the info, I'll look into that. But, as you said, we're going to need a solution whereby individual users can boost the volume to the customer, but not to all customers. Is there any third party devices anyone can recommend? Thanks. G!

March 15th, 2005, 10:35 AM	#4 (permalink)
DaveA PBXtech SILVER 25+ posts Join Date: Jul 2004 Posts: 37	Re: Outgoing speach amplifier Hi George Are you in the UK? If so try here http://www.sarabec.com/telecoms.asp?cat=7 Cheers __________________ ------------------------------------------------------------------------------------ Click -->UK IP Office Forum. A new UK based IP Office User Group.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SMDR6 Help - Need outgoing call info immediately	rbichon	Norstar systems	0	December 28th, 2005 10:16 AM
Set outgoing CIDname	mbegan	IP Office	6	October 9th, 2005 06:18 PM
Outgoing Trunk to Trunk transfer	ggde	Definity Servers	10	February 23rd, 2005 06:01 AM
outgoing name display on PRI	senk1s	Meridian systems	2	April 14th, 2004 07:48 PM
Any Solutions On Outgoing Call-ID non ISDN??	tek	Definity Servers	2	December 30th, 2003 09:44 AM