IP office to Definity cont.

sgates · December 1st, 2004, 08:40 PM

Not sure if I should have continued my previous thread but I started a new one.

I've connected my IP office 403 to My Definity G3si R8 via the T1 interface of the IP Office to a T1 card in the Definity. I am able to reach stations attached to the Definity. My plan is to get dial tone from the Definity so that the stations attached to the IP Office can dial out. Currently I am unable to make phone calls from the IP Office. Can someone give me guidance on the steps necessary to gain access to a Definity trunk from the IP Office? Thank you.

stevea2z · December 16th, 2004, 09:41 AM

do you get access when you dial the trunk access codes ?

corhavelaar · December 16th, 2004, 04:07 PM

I have no experience with the Definity but maybe this link can help you with some documentation:
http://www1.avaya.com/enterprise/res...iguration.html

big70 · December 16th, 2004, 04:35 PM

You must use the same shortcode,s as you dail out with the IP-Office.
Only the 9 or 0 stay,s
Short Code [9]N;
Tel Number 9N
LineGroupID (IP-Trunk)
Feature Dial

Then the Definity wil do the rest.

Greets Peter

bwilch · December 22nd, 2004, 02:01 PM

Be sure your "trunk to trunk transfer" is enabled. This would be on your definity under "disp sys feat" If it's not you'll want to change it and turn it on.

December 1st, 2004, 08:40 PM	#1 (permalink)
sgates Join Date: Jul 2003 Posts: 5	IP office to Definity cont. Not sure if I should have continued my previous thread but I started a new one. I've connected my IP office 403 to My Definity G3si R8 via the T1 interface of the IP Office to a T1 card in the Definity. I am able to reach stations attached to the Definity. My plan is to get dial tone from the Definity so that the stations attached to the IP Office can dial out. Currently I am unable to make phone calls from the IP Office. Can someone give me guidance on the steps necessary to gain access to a Definity trunk from the IP Office? Thank you.

December 16th, 2004, 09:41 AM	#2 (permalink)
stevea2z Join Date: Dec 2004 Posts: 2	Re: IP office to Definity cont. do you get access when you dial the trunk access codes ?

December 16th, 2004, 04:07 PM	#3 (permalink)
corhavelaar PBXtech SILVER 25+ posts Join Date: Aug 2004 Posts: 81	Re: IP office to Definity cont. I have no experience with the Definity but maybe this link can help you with some documentation: http://www1.avaya.com/enterprise/res...iguration.html

December 16th, 2004, 04:35 PM	#4 (permalink)
big70 PBXtech SILVER 25+ posts Join Date: Aug 2004 Posts: 47	Re: IP office to Definity cont. You must use the same shortcode,s as you dail out with the IP-Office. Only the 9 or 0 stay,s Short Code [9]N; Tel Number 9N LineGroupID (IP-Trunk) Feature Dial Then the Definity wil do the rest. Greets Peter

December 22nd, 2004, 02:01 PM	#5 (permalink)
bwilch PBXtech SILVER 25+ posts Join Date: Sep 2004 Posts: 44	Re: IP office to Definity cont. Be sure your "trunk to trunk transfer" is enabled. This would be on your definity under "disp sys feat" If it's not you'll want to change it and turn it on.

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ip office and definity	Costas hadjipan	IP Office	0	January 31st, 2006 04:50 AM
IP Office to Definity via VoIP	gattmandoo1	IP Office	3	September 1st, 2005 04:16 PM
IP Office to Definity can it be done?	sgates	IP Office	4	November 30th, 2004 06:21 PM
OID List	gcavert	IP Office	1	June 23rd, 2004 10:09 AM
Definity & IP OFFIce	mevans	Definity Servers	1	June 21st, 2004 10:15 AM