Anyone Used 4610 sets?

sjered · August 19th, 2004, 10:13 AM

According to Avaya the 4610 IP phones are not supported until the 3.0 release this fall. Has anyone tried hooking up a 4610 set to see if it will work prior to 3.0 release? (I know that the 4620's worked prior to the release of 2.0, when they were actually supported). Please let me know if you have any experience working with 4610's on IP Office.

IPGuru · August 20th, 2004, 02:16 AM

You will probably find that they "work" but not fully.

we have installed 2402 units on a site pending 3.0 & they can be used as basic phones but non of the display features will work.

Cephas · August 20th, 2004, 11:11 AM

Quote:

Originally Posted by sjered

According to Avaya the 4610 IP phones are not supported until the 3.0 release this fall. Has anyone tried hooking up a 4610 set to see if it will work prior to 3.0 release? (I know that the 4620's worked prior to the release of 2.0, when they were actually supported). Please let me know if you have any experience working with 4610's on IP Office.

I haven't tried them, but I believe I heard someone comment that the displays on 4610's currently do not work at all.

Peter

Brent.Wall · August 20th, 2004, 11:21 AM

I tested the 4610 on the IPO a couple of months ago. Out of the box (with v1.99 firmware), all of the functions, including the display, worked as expected. The only problem I noticed was an occasional studder dialtone when using the speakerphone. Thinking that the more recent firmware may resolve this problem, I upgraded the 4610 to v2.0 firmware. This indeed seemed to fix the studder dialtone problem but rendered the display inoperable. You can see the boot messages but the display is blank once the phone boots.

I can't back-version it because I cannot find version 1.99 of the firmware.

Cephas · August 20th, 2004, 11:23 AM

Quote:

Originally Posted by Brent.Wall

I tested the 4610 on the IPO a couple of months ago. Out of the box (with v1.99 firmware), all of the functions, including the display, worked as expected. The only problem I noticed was an occasional studder dialtone when using the speakerphone. Thinking that the more recent firmware may resolve this problem, I upgraded the 4610 to v2.0 firmware. This indeed seemed to fix the studder dialtone problem but rendered the display inoperable. You can see the boot messages but the display is blank once the phone boots.

I can't back-version it because I cannot find version 1.99 of the firmware.

1.99 is not a real working release of the firmware. You can't operate a 403 with it. It's only purpose was to upgrade the loader on a 403 in preperation for upgrading to 2.x

Peter Sherwood

Brent.Wall · August 22nd, 2004, 12:03 AM

I'm referring to the firmware version of the phone; not the IP Office.

August 19th, 2004, 10:13 AM	#1 (permalink)
sjered PBXtech SILVER 25+ posts Join Date: Jul 2004 Posts: 25	Anyone Used 4610 sets? According to Avaya the 4610 IP phones are not supported until the 3.0 release this fall. Has anyone tried hooking up a 4610 set to see if it will work prior to 3.0 release? (I know that the 4620's worked prior to the release of 2.0, when they were actually supported). Please let me know if you have any experience working with 4610's on IP Office.

August 20th, 2004, 02:16 AM	#2 (permalink)
IPGuru PBXtech GOLD 100+ posts Join Date: Jul 2003 Posts: 215	Re: Anyone Used 4610 sets? You will probably find that they "work" but not fully. we have installed 2402 units on a site pending 3.0 & they can be used as basic phones but non of the display features will work. __________________ Universal Plan B: - When all else fails CHEAT!

August 20th, 2004, 11:21 AM	#4 (permalink)
Brent.Wall Join Date: Apr 2004 Posts: 10	Re: Anyone Used 4610 sets? I tested the 4610 on the IPO a couple of months ago. Out of the box (with v1.99 firmware), all of the functions, including the display, worked as expected. The only problem I noticed was an occasional studder dialtone when using the speakerphone. Thinking that the more recent firmware may resolve this problem, I upgraded the 4610 to v2.0 firmware. This indeed seemed to fix the studder dialtone problem but rendered the display inoperable. You can see the boot messages but the display is blank once the phone boots. I can't back-version it because I cannot find version 1.99 of the firmware.

August 22nd, 2004, 12:03 AM	#6 (permalink)
Brent.Wall Join Date: Apr 2004 Posts: 10	Re: Anyone Used 4610 sets? I'm referring to the firmware version of the phone; not the IP Office.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Distinctive ring on 5620 sets	dharkin	IP Office	1	February 24th, 2006 08:24 AM
WTB OSS Norstar M7310 and Avaya/Lucent 18D sets	nfcphoneman	Vendors (Discussion and Advertisments)	0	July 18th, 2005 12:00 PM
RF/radio noise on Partner sets	sdoherty	Partner Systems	4	November 23rd, 2004 04:02 PM
S8700 + Avaya 4610 + NICE	rpusag	Definity Servers	1	June 29th, 2004 12:24 PM
T7316 sets on 8x24 DR5 - internal autodial no indication	payton	Norstar systems	1	January 15th, 2004 02:45 PM