R1.4 Docs & Software

hawaiian · June 18th, 2003, 09:55 PM

if you havnt already got it:

http://support.avaya.com/japple/css/...ctedBucket=all

smithermang · June 20th, 2003, 08:16 AM

Has anyone seen the documentation for the enhanced support for VoIP over Frame Relay in 1.4?

hawaiian · June 20th, 2003, 08:27 AM

Oh that link above download the IP Office Software 1.4 Addendum. Page 11

smithermang · June 20th, 2003, 08:42 AM

I did that and it says "Configuration and operation of this type of service wiil be detailed in a separate dedicated technical bulletin" I am looking for that bulletin. Thanks!

hawaiian · June 20th, 2003, 10:31 AM

3.17. Voice over IP over Frame Relay

In previous releases of IP Office software Voice over IP on Frame Relay was only supported when PPP encapsulation was used. IP Office 1.4 introduces further Frame Relay enhancements, which allows the support of Voice over IP on Frame Relay when using RFC1490 encapsulation. In order to provide QoS when using RFC1490 encapsulation, FRF12 fragmentation has been implemented with IP Office 1.4 software.

When using RFC1490 + FRF12 it should be noted that all parameters on the Service | PPP tab are ignored. In this instance the IPHC parameters are configured within the DLCI configuration form of the WAN Port tab. It is imperative that all IPHC values are matched at each end of the link.

Implementation of these additional standards will increase the support for QoS with a number of third party vendor networks, such as Cisco.

http://support.avaya.com/japple/css/....UsageUpdate()

smithermang · June 20th, 2003, 10:47 AM

Thanks for the assistance!

June 18th, 2003, 09:55 PM	#1 (permalink)
hawaiian PBXtech GOLD 100+ posts Join Date: Apr 2003 Posts: 108	R1.4 Docs & Software if you havnt already got it: http://support.avaya.com/japple/css/...ctedBucket=all

June 20th, 2003, 08:27 AM	#3 (permalink)
hawaiian PBXtech GOLD 100+ posts Join Date: Apr 2003 Posts: 108	Oh that link above download the IP Office Software 1.4 Addendum. Page 11 __________________ PBXtech.com

June 20th, 2003, 10:31 AM	#5 (permalink)
hawaiian PBXtech GOLD 100+ posts Join Date: Apr 2003 Posts: 108	3.17. Voice over IP over Frame Relay In previous releases of IP Office software Voice over IP on Frame Relay was only supported when PPP encapsulation was used. IP Office 1.4 introduces further Frame Relay enhancements, which allows the support of Voice over IP on Frame Relay when using RFC1490 encapsulation. In order to provide QoS when using RFC1490 encapsulation, FRF12 fragmentation has been implemented with IP Office 1.4 software. When using RFC1490 + FRF12 it should be noted that all parameters on the Service \| PPP tab are ignored. In this instance the IPHC parameters are configured within the DLCI configuration form of the WAN Port tab. It is imperative that all IPHC values are matched at each end of the link. Implementation of these additional standards will increase the support for QoS with a number of third party vendor networks, such as Cisco. http://support.avaya.com/japple/css/....UsageUpdate() __________________ PBXtech.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DECT Hardware & Software Versions	dhaggar	IP Office	0	September 28th, 2005 10:56 PM
Call Loging software	deltaserver	IP Office	1	January 5th, 2005 06:47 AM
IPO - Call Billin Software	reddyrh	IP Office	1	June 30th, 2004 06:15 AM
Call Logging Software	bigjohn8210	IP Office	4	June 9th, 2004 06:55 AM
Compact ICS software - Restricted or Expanded?	Crooner	Norstar systems	5	May 18th, 2004 07:04 AM

June 20th, 2003, 08:16 AM	#2 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Has anyone seen the documentation for the enhanced support for VoIP over Frame Relay in 1.4?

Remove advertisements Sponsored links
PBXtech.info Advertisement

June 20th, 2003, 08:42 AM	#4 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	I did that and it says "Configuration and operation of this type of service wiil be detailed in a separate dedicated technical bulletin" I am looking for that bulletin. Thanks!

June 20th, 2003, 10:47 AM	#6 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Thanks for the assistance!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)