How do I set up a PRI?

mtfs · June 8th, 2003, 04:57 PM

How do you set up a PRI in the definity??

nexSIP · June 8th, 2003, 10:07 PM

in the PBX: add ds1 [board location]
Bit Rate: 1.544
Signaling Mode: isdn-pri
connect: network
Interworking Message: PROGress
Interface Companding: mulaw
Idle Code: 11111111
Line Coding: b8zs
Framing Mode: esf
Country Protocol: 1
Protocol Verion: a

This is a common setup in the USA.

mtfs · July 3rd, 2003, 10:21 AM

What does the protocol stand for? What is the difference between a and b?

nexSIP · July 3rd, 2003, 11:17 AM

1-a United States,Canada- AT&T TR 41449/ 41459 (tested with AT&T network, Canadian network, and MCI network)

1-b United States Bellcore TR 1268;NIUF.302; ANSI T1.607

1-c United States NORTEL DMS-250 BCS36/IEC01 Service

1-d United States Telecordia SR-4287 Service

ahays · July 7th, 2003, 03:35 PM

The attached document (downloaded from the Avaya Business Partner Website) contains ISDN Protocol setup information for a wide range of CO PBX types.

neonerz · October 21st, 2005, 09:37 AM

Quote:

Originally Posted by ahays

The attached document (downloaded from the Avaya Business Partner Website) contains ISDN Protocol setup information for a wide range of CO PBX types.

WOW thank you for this, you just helped me out of an jam in the middle of a turn-up!

June 8th, 2003, 04:57 PM	#1 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	How do I set up a PRI? How do you set up a PRI in the definity??

June 8th, 2003, 10:07 PM	#2 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	in the PBX: add ds1 [board location] Bit Rate: 1.544 Signaling Mode: isdn-pri connect: network Interworking Message: PROGress Interface Companding: mulaw Idle Code: 11111111 Line Coding: b8zs Framing Mode: esf Country Protocol: 1 Protocol Verion: a This is a common setup in the USA. __________________ http://www.nexsip.com Communicate Openly and Freely Last edited by nexSIP; June 8th, 2003 at 10:12 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Set outgoing CIDname	mbegan	IP Office	6	October 9th, 2005 05:18 PM
PRI setup assistance	nfarooqui	Definity Servers	6	August 23rd, 2005 04:25 PM
Cannot dial out on PRI set for NI-2	jisbell	Definity Servers	2	March 26th, 2004 12:11 PM
Pri Set Up	payton	Merlin Systems	1	February 11th, 2004 01:26 PM
How do you set which T1 or PRI for clocking?	mtfs	Definity Servers	1	June 8th, 2003 10:03 PM

Remove advertisements Sponsored links
PBXtech.info Advertisement

July 3rd, 2003, 10:21 AM	#3 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	What does the protocol stand for? What is the difference between a and b?

July 3rd, 2003, 11:17 AM	#4 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	1-a United States,Canada- AT&T TR 41449/ 41459 (tested with AT&T network, Canadian network, and MCI network) 1-b United States Bellcore TR 1268;NIUF.302; ANSI T1.607 1-c United States NORTEL DMS-250 BCS36/IEC01 Service 1-d United States Telecordia SR-4287 Service

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)