QoS for h.323 trunk and IP Media processor

romantarasov · December 1st, 2003, 01:59 AM

Hello.
Is there any way to set obviously, which ports media processor will use to send/receive VoIP packets after connection setup.
I need this information, because i want to specify QoS for h.323 trunk between Definity and IP Office.
There's a note in the documentation for IP Office, that it uses UDP ports 49152-53247 for RTP traffic, but there's no such information for Definity.
Of cource i can watch the results of "list trace tac" for h.323 trunk to see that range of ports, but it's better to have that information from "official sources" :)

romantarasov · December 1st, 2003, 02:17 AM

I've found it - this is udp port range for the source ip-network-region.

December 1st, 2003, 01:59 AM	#1 (permalink)
romantarasov Join Date: Nov 2003 Posts: 5	QoS for h.323 trunk and IP Media processor Hello. Is there any way to set obviously, which ports media processor will use to send/receive VoIP packets after connection setup. I need this information, because i want to specify QoS for h.323 trunk between Definity and IP Office. There's a note in the documentation for IP Office, that it uses UDP ports 49152-53247 for RTP traffic, but there's no such information for Definity. Of cource i can watch the results of "list trace tac" for h.323 trunk to see that range of ports, but it's better to have that information from "official sources" :) __________________ -- Best regards, Roman Tarasov.

December 1st, 2003, 02:17 AM	#2 (permalink)
romantarasov Join Date: Nov 2003 Posts: 5	Re: QoS for h.323 trunk and IP Media processor I've found it - this is udp port range for the source ip-network-region. __________________ -- Best regards, Roman Tarasov.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)