Avaya G3R and Nortel Meridian Switch Integration

mindyw · September 3rd, 2003, 01:52 PM

I am trying do the integration between Avaya G3R R-9
and Nortel Meridian PBX using end-to-end T1 on ISDN PRI Signaling without Q-SIG.

Later we are getting the Q-SIG also.

Fyi.. The medium is transparent i.e. doesn't have any signaling of it's own.

The T1 is not coming in Sync. i.e. "D" channel is not up.

Is anyone can tell me the settings in Avaya and
Nortel PBX ?

Thanks in advance.

stubborne · September 8th, 2003, 03:45 PM

On the ds1 page, try changing the Protocol Version field to 'b' or 'c'. Trick is, you should delete the DS1 config (remove ds1 X) before changing this field or you could have some corruption issues. In order to delete the DS1 config, you'll have to remove the sig channel 1st and remove any trunk members in the trunk-group form too.

stubborne · September 8th, 2003, 03:46 PM

oh yeah, you have to busy the sig channel before you can remove it (meethinks)

September 3rd, 2003, 01:52 PM	#1 (permalink)
mindyw PBXtech SILVER 25+ posts Join Date: May 2003 Posts: 36	Avaya G3R and Nortel Meridian Switch Integration I am trying do the integration between Avaya G3R R-9 and Nortel Meridian PBX using end-to-end T1 on ISDN PRI Signaling without Q-SIG. Later we are getting the Q-SIG also. Fyi.. The medium is transparent i.e. doesn't have any signaling of it's own. The T1 is not coming in Sync. i.e. "D" channel is not up. Is anyone can tell me the settings in Avaya and Nortel PBX ? Thanks in advance.

September 8th, 2003, 03:45 PM	#2 (permalink)
stubborne PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 401	On the ds1 page, try changing the Protocol Version field to 'b' or 'c'. Trick is, you should delete the DS1 config (remove ds1 X) before changing this field or you could have some corruption issues. In order to delete the DS1 config, you'll have to remove the sig channel 1st and remove any trunk members in the trunk-group form too. __________________ Stu

September 8th, 2003, 03:46 PM	#3 (permalink)
stubborne PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 401	oh yeah, you have to busy the sig channel before you can remove it (meethinks) __________________ Stu

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements Sponsored links
PBXtech.info Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)