Installing additional G650

btrain2871 · July 10th, 2008, 01:50 PM

I have an s8700 with an MCC and then a G650 that's on another floor connected via fiber expansion interface. I need to add another G650 that attaches to the existing on the other floor. once the ribbon cable is connected does anything require programming in software to see the new G650 or will it auto find it?

martinyoung · July 11th, 2008, 09:55 AM

There is a plug inside the rear of the carrier on the right that identifies the carrier as A, B, C, etc.

martinyoung · July 11th, 2008, 09:58 AM

You also need to tell the PBX that port network now has two carriers so you can use it.

July 10th, 2008, 01:50 PM	#1 (permalink)
btrain2871 PBXtech PLATINUM 300+ posts Join Date: Mar 2006 Posts: 383	Installing additional G650 I have an s8700 with an MCC and then a G650 that's on another floor connected via fiber expansion interface. I need to add another G650 that attaches to the existing on the other floor. once the ribbon cable is connected does anything require programming in software to see the new G650 or will it auto find it?

July 11th, 2008, 09:55 AM	#2 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,402	Re: Installing additional G650 There is a plug inside the rear of the carrier on the right that identifies the carrier as A, B, C, etc. __________________ Marty Retired Avaya DSIC tech

July 11th, 2008, 09:58 AM	#3 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,402	Re: Installing additional G650 You also need to tell the PBX that port network now has two carriers so you can use it. __________________ Marty Retired Avaya DSIC tech

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)