status g650

btrain2871 · June 7th, 2008, 06:43 PM

I have an s8700 with an MCC on our main floor and then a G650 on a totally different floor connected via expansion interface. Due to a power down on the floor where the G650 is we pulled the plug on it. What is the command to see the status of it? I tried stat media-gateway and it showed me nothing. Can't seem to find it.

colt45 · June 8th, 2008, 07:01 PM

You did say 'connected via expansion interface' so that implies fiber/center stage no IP connect.

Try "List cabinet", if center stage should see the cabinet. Try also to 'list conf car xx" to see the installed circuit packs. Can you test a station that is connected to the g650?

If you are IP connected then "status media-gateway" should show either 'up' or 'dn' status.

Try "list media-gateway" to all of them and note the gateway number.

Next "list ip-network-region qos {monitor}" and note the region.

fataldata · June 11th, 2008, 09:12 AM

Status cab # or status Port #

technician101 · July 11th, 2008, 03:38 PM

You can also use status health

June 7th, 2008, 06:43 PM	#1 (permalink)
btrain2871 PBXtech PLATINUM 300+ posts Join Date: Mar 2006 Posts: 393	status g650 I have an s8700 with an MCC on our main floor and then a G650 on a totally different floor connected via expansion interface. Due to a power down on the floor where the G650 is we pulled the plug on it. What is the command to see the status of it? I tried stat media-gateway and it showed me nothing. Can't seem to find it.

June 8th, 2008, 07:01 PM	#2 (permalink)
colt45 PBXtech GOLD 100+ posts Join Date: Dec 2004 Posts: 113	Re: status g650 You did say 'connected via expansion interface' so that implies fiber/center stage no IP connect. Try "List cabinet", if center stage should see the cabinet. Try also to 'list conf car xx" to see the installed circuit packs. Can you test a station that is connected to the g650? If you are IP connected then "status media-gateway" should show either 'up' or 'dn' status. Try "list media-gateway" to all of them and note the gateway number. Next "list ip-network-region qos {monitor}" and note the region.

June 11th, 2008, 09:12 AM	#3 (permalink)
fataldata PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 315	Re: status g650 Status cab # or status Port # __________________ Systems In Use: S8700 CM3.0 and S8710 CM3.1.1

July 11th, 2008, 03:38 PM	#4 (permalink)
technician101 PBXtech SILVER 25+ posts Join Date: May 2004 Posts: 33	Re: status g650 You can also use status health

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)