martinyoung

This assumes that your outgoing calls are over an ISDN trunk. If it is not, then the rules are different. First make sure your vendor can pass the data you want to pass.

__________________
Marty
Retired Avaya DSIC tech

fataldata

Change this entry in your Public Unknown Numbering table
4 6 1 03391789 10
to a CPN Len of 12 if you want the extensions to show up at the end of your CPN Prefix. Currently with it set to 10, i'm guessing is why you are seeing
0339178970 and not 033917896870.
As for the reason your callers see 033917896850.
Is there anything special about extension 6850? Like is it a Trunk Group extension or the billing number for the DS1 that Trunk group 1 uses?

__________________
Systems In Use:
S8700 CM3.0 and S8710 CM3.1.1

PBXtech.info

 

sha111

fataldata,

here is ds1 info,


display ds1 001v2
DS1 CIRCUIT PACK
Location: 001V2 Name: PRI
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: isdn-pri
Connect: network
TN-C7 Long Timers? n Country Protocol: etsi
Interworking Message: PROgress Protocol Version: a
Interface Companding: alaw CRC? n
Idle Code: 01010100
DCP/Analog Bearer Capability: 3.1kHz
T303 Timer(sec): 4

Slip Detection? n Near-end CSU Type: other
Echo Cancellation

fataldata

Well that is certainly an ISDN trunk. Probably time to call your provider. Only other question is if there is any significance to the 6850 extension.

__________________
Systems In Use:
S8700 CM3.0 and S8710 CM3.1.1

technician101

Your ISDN public table appears to be set for a length of 10 but you are wanting 12 digits sent. Might check that.

ZeN216

also,, just in case... check page 3 of your trunk group form and make sure send name and send calling number are both "y"

PBXtech.info

 

colt45

I agree if the same number is seen on the cell/outside phones every time the provider is sending that number. I intentionally had Bellsouth force my LDN on all calls for billing purposes.

mhobbs

Hi Have you tried altering the public unknown to be 03391789 with length 12?