s8300 analog board

btrain2871 · May 6th, 2008, 12:12 PM

I have an s8300/g700 with an analog board and things such as fax machine and modem were not responding. unfortunately we had an outside consultant come in that didn't have a 2500 set to plug directly to the card but he did indicate there was an alarm on the card. when displaying alarms in software it shows none. after moving these connections onto a different analog card the devices worked. is that normally how a board going bad behaves??

phones329 · May 9th, 2008, 12:21 PM

Have you by chance tried to busy out and release the board, or unseat then reseat the board? Sounds like it might have just gone hyperactive.

May 6th, 2008, 12:12 PM	#1 (permalink)
btrain2871 PBXtech PLATINUM 300+ posts Join Date: Mar 2006 Posts: 368	s8300 analog board I have an s8300/g700 with an analog board and things such as fax machine and modem were not responding. unfortunately we had an outside consultant come in that didn't have a 2500 set to plug directly to the card but he did indicate there was an alarm on the card. when displaying alarms in software it shows none. after moving these connections onto a different analog card the devices worked. is that normally how a board going bad behaves??

May 9th, 2008, 12:21 PM	#2 (permalink)
phones329 PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 59	Re: s8300 analog board Have you by chance tried to busy out and release the board, or unseat then reseat the board? Sounds like it might have just gone hyperactive.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)