Avaya AUDIX 4.4-5 DCIU Integration Problem

StG · January 13th, 2008, 01:24 PM

Hello Everyone

We have an Intuity AUDIX/Guestworks 4.4-5 using a DCIU integration to a G3 MCC PBX. It had a MAJOR ALARM for integration and we replaced the EICON board, which cleared the major. However, when checking the SI status, the Link Level 2 field in DOWN. Link 1 on the PBX is in a RESTARTING state.

Any thoughts?

Stg

martinyoung · January 13th, 2008, 06:56 PM

Have you tried to busy and release the link?

January 13th, 2008, 01:24 PM	#1 (permalink)
StG Join Date: Jan 2008 Posts: 8	Avaya AUDIX 4.4-5 DCIU Integration Problem Hello Everyone We have an Intuity AUDIX/Guestworks 4.4-5 using a DCIU integration to a G3 MCC PBX. It had a MAJOR ALARM for integration and we replaced the EICON board, which cleared the major. However, when checking the SI status, the Link Level 2 field in DOWN. Link 1 on the PBX is in a RESTARTING state. Any thoughts? Stg

January 13th, 2008, 06:56 PM	#2 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,376	Re: Avaya AUDIX 4.4-5 DCIU Integration Problem Have you tried to busy and release the link? __________________ Marty Retired Avaya DSIC tech

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)