Music On Val bd

mdbaudry · January 9th, 2008, 01:05 PM

What specs are required for a wav file on the VAL board, ie 16bit, 8khz......

fataldata · January 9th, 2008, 03:44 PM

1. Make sure the announcement file format is as described in the following bullets. To check that go to Windows Explorer, right click on the wave file, go to properties, and look around. In my computer it can be found under the ‘Summary’ tab.
Ø CCITT A-Law or CCIT u-law companding format (do not use PCM)
Ø 8KHz sample rate
Ø 8-bit resolution (bits per sample)
Ø Mono (channels = 1)

From my notes.

January 9th, 2008, 01:05 PM	#1 (permalink)
mdbaudry Join Date: Oct 2007 Posts: 1	Music On Val bd What specs are required for a wav file on the VAL board, ie 16bit, 8khz......

January 9th, 2008, 03:44 PM	#2 (permalink)
fataldata PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 307	Re: Music On Val bd 1. Make sure the announcement file format is as described in the following bullets. To check that go to Windows Explorer, right click on the wave file, go to properties, and look around. In my computer it can be found under the ‘Summary’ tab. Ø CCITT A-Law or CCIT u-law companding format (do not use PCM) Ø 8KHz sample rate Ø 8-bit resolution (bits per sample) Ø Mono (channels = 1) From my notes. __________________ Systems In Use: S8700 CM3.0 and S8710 CM3.1.1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)