DS1 errors

nhdjoseywales · August 8th, 2007, 05:08 PM

i think i just answered my own question but umm, shouldnt my ds1 card have lights lit up even if it has a trunk issue? i think the card must have died, no lights lit at all

martinyoung · August 9th, 2007, 09:47 AM

It depends on how it is installed whether there will be any lights on. If you have an integrated CSU attached the status 3 LED will be green. If you are using an external CSU and there are no problems, all four status lights will be off. If there is traffic the amber LED will be lit. If there is a problem the red LED might be lit.

Reseating the board is one way to test it but make sure the amber light is off first. Status the trunk group to see if the ports not out of service.

August 8th, 2007, 05:08 PM	#1 (permalink)
nhdjoseywales PBXtech GOLD 100+ posts Join Date: Feb 2007 Posts: 109	DS1 errors i think i just answered my own question but umm, shouldnt my ds1 card have lights lit up even if it has a trunk issue? i think the card must have died, no lights lit at all

August 9th, 2007, 09:47 AM	#2 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,401	Re: DS1 errors It depends on how it is installed whether there will be any lights on. If you have an integrated CSU attached the status 3 LED will be green. If you are using an external CSU and there are no problems, all four status lights will be off. If there is traffic the amber LED will be lit. If there is a problem the red LED might be lit. Reseating the board is one way to test it but make sure the amber light is off first. Status the trunk group to see if the ports not out of service. __________________ Marty Retired Avaya DSIC tech

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)