IPSI Service State Out

mugs · February 7th, 2007, 09:27 AM

I am unable to add a new remote G650 port network

I configure ipsi with ip add 172.16.12.12 for 4a and 172.16.12.13 for 4b subnet 255.255.255.0 and gateway 172.16.12.1 which is the router

when I do a list ipserv get serv state out and state of health 0.1.1.0

already check cables, change cables, change it to a different switch on the network, check system param dupl and is set to Y and I dont know what else to check

I think the problem is in the network, I am able to ping the server from the ipsi and the ipsi from the server

I have phones on the same lan connecting remotely and they work fine

the connection between buildings is a WAN Ipsec tunnel behind firewalls
is there a specific port or configuration that needs to be done for IPSI connections?

fataldata · February 7th, 2007, 01:38 PM

Quote:

Originally Posted by mugs

I am unable to add a new remote G650 port network

I configure ipsi with ip add 172.16.12.12 for 4a and 172.16.12.13 for 4b subnet 255.255.255.0 and gateway 172.16.12.1 which is the router

when I do a list ipserv get serv state out and state of health 0.1.1.0

already check cables, change cables, change it to a different switch on the network, check system param dupl and is set to Y and I dont know what else to check

I think the problem is in the network, I am able to ping the server from the ipsi and the ipsi from the server

I have phones on the same lan connecting remotely and they work fine

the connection between buildings is a WAN Ipsec tunnel behind firewalls
is there a specific port or configuration that needs to be done for IPSI connections?

Have you tried Busy and releasing from Communication Manager/ASA?

Arslanalizaidee · February 7th, 2007, 10:03 PM

Hi,

Kindly find an attach doc for IPSI config n check if u missed out something.

February 7th, 2007, 09:27 AM	#1 (permalink)
mugs PBXtech SILVER 25+ posts Join Date: Aug 2004 Posts: 44	IPSI Service State Out I am unable to add a new remote G650 port network I configure ipsi with ip add 172.16.12.12 for 4a and 172.16.12.13 for 4b subnet 255.255.255.0 and gateway 172.16.12.1 which is the router when I do a list ipserv get serv state out and state of health 0.1.1.0 already check cables, change cables, change it to a different switch on the network, check system param dupl and is set to Y and I dont know what else to check I think the problem is in the network, I am able to ping the server from the ipsi and the ipsi from the server I have phones on the same lan connecting remotely and they work fine the connection between buildings is a WAN Ipsec tunnel behind firewalls is there a specific port or configuration that needs to be done for IPSI connections?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)