EC500 question

payton · July 9th, 2003, 11:38 AM

We have EC500 and I can use the outbound to cell just fine.

But, how do you dial into the EC500 from a CELL phone to make an outbound call that will spoof the ANI. Make it look like im calling from my desk?

chrissa · July 9th, 2003, 01:07 PM

On the XMOBILE station, the cell phone number has to be setup exactly as it shows on the incoming ANI (ie if it shows all 10 digits when you call in, then the number has to be programmed as that). You can't put in 123-4567 for the cell number if it normally displays as 321-123-4567.

Also, check to make sure that the mapping mode is setup as "both." If it is set to "termination," then that is why it only works calling your cell phone.

For more information on programming the XMOBILE station, here's a link to the administration guide that explains how to program the XMOBILE station in the switch.
http://support.avaya.com/elmodocs2/E...10100500_4.pdf

Additionally, it will only show the caller ID of your desk if you are calling another number within the same PBX. If you're trying to call out to somewhere not on the PBX (or another swith that is conneected via DCS, QSIG, etc.) then it will show your cell number.

Here's a link to the user guide on Avaya's site, and Chapter 2 covers making and receiving calls.
http://support.avaya.com/elmodocs2/E...10100700_3.pdf

Hope that helps.

Admin · July 9th, 2003, 01:19 PM

Here is the Admin guide:

Admin · July 9th, 2003, 01:19 PM

Here is the user guide:

July 9th, 2003, 11:38 AM	#1 (permalink)
payton PBXtech GOLD 100+ posts Join Date: Apr 2003 Posts: 121	EC500 question We have EC500 and I can use the outbound to cell just fine. But, how do you dial into the EC500 from a CELL phone to make an outbound call that will spoof the ANI. Make it look like im calling from my desk?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ec500	PBXDUDE	Definity Servers	15	April 3rd, 2007 12:35 PM
Differentiate between EC500 feature and Call Forwarding	dinesh	Definity Servers	3	August 22nd, 2005 03:30 PM
EC500 Caller ID	kik	Definity Servers	2	August 21st, 2005 10:37 AM
EC500 Office Caller ID issue?	crazytom	Definity Servers	5	March 3rd, 2005 09:03 AM
EC500 calls	dwheatley	Definity Servers	5	February 2nd, 2005 02:56 PM

July 9th, 2003, 01:07 PM	#2 (permalink)
chrissa Join Date: Jul 2003 Posts: 22	On the XMOBILE station, the cell phone number has to be setup exactly as it shows on the incoming ANI (ie if it shows all 10 digits when you call in, then the number has to be programmed as that). You can't put in 123-4567 for the cell number if it normally displays as 321-123-4567. Also, check to make sure that the mapping mode is setup as "both." If it is set to "termination," then that is why it only works calling your cell phone. For more information on programming the XMOBILE station, here's a link to the administration guide that explains how to program the XMOBILE station in the switch. http://support.avaya.com/elmodocs2/E...10100500_4.pdf Additionally, it will only show the caller ID of your desk if you are calling another number within the same PBX. If you're trying to call out to somewhere not on the PBX (or another swith that is conneected via DCS, QSIG, etc.) then it will show your cell number. Here's a link to the user guide on Avaya's site, and Chapter 2 covers making and receiving calls. http://support.avaya.com/elmodocs2/E...10100700_3.pdf Hope that helps.

Remove advertisements Sponsored links
PBXtech.info Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)