Export/import switch settings in ASA

nhammer · July 9th, 2003, 08:34 AM

Is it possible to export all the switch settings from one installation of ASA to use in setting up another installation?

smithermang · July 9th, 2003, 09:58 AM

I don't think so, but if anyone knows how I would like to know.

nexSIP · July 9th, 2003, 11:51 AM

I have done this. On the second PC just install ASA like normal then overwrite it a copy from the old PC.

smithermang · July 9th, 2003, 12:16 PM

Do you go to the 1st switch and hit "Import Data" and on the second switch hit "Export Data"?

chrissa · July 9th, 2003, 12:28 PM

I believe that if you copy the persist.dat file in the \Program Files\Avaya\Site Administration\user folder from the old PC onto the new PC that should copy over all settings. The location of the user folder may vary if you installed to a different directory.

smithermang · July 9th, 2003, 01:47 PM

Thanks alot for the info. I will try this next time I program with ASA.

nhammer · July 18th, 2003, 08:38 AM

Thanks this worked great!!!!

>>I believe that if you copy the persist.dat file in the \Program Files\Avaya\Site Administration\user folder from the old PC onto the new PC that should copy over all settings. The location of the user folder may vary if you installed to a different directory.

smithermang · July 18th, 2003, 09:11 AM

This sure makes life easier!!

July 9th, 2003, 08:34 AM	#1 (permalink)
nhammer PBXtech SILVER 25+ posts Join Date: May 2003 Posts: 60	Export/import switch settings in ASA Is it possible to export all the switch settings from one installation of ASA to use in setting up another installation?

July 9th, 2003, 11:51 AM	#3 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	I have done this. On the second PC just install ASA like normal then overwrite it a copy from the old PC. __________________ http://www.nexsip.com Communicate Openly and Freely

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't launch ASA	cmar	Definity Servers	5	September 16th, 2005 02:16 PM
Import VDN's using ASA	grahekf	Definity Servers	2	August 25th, 2005 02:22 PM
emailing reports from ASA 2.0.12	ISA_Flee	Definity Servers	3	July 28th, 2005 06:12 PM
Routing call through another switch	kik	Definity Servers	5	August 4th, 2004 11:30 AM
ASA Import and Audix	fataldata	Definity Servers	4	July 5th, 2004 10:36 AM

July 9th, 2003, 09:58 AM	#2 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	I don't think so, but if anyone knows how I would like to know.

Remove advertisements Sponsored links
PBXtech.info Advertisement

July 9th, 2003, 12:16 PM	#4 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Do you go to the 1st switch and hit "Import Data" and on the second switch hit "Export Data"?

July 9th, 2003, 12:28 PM	#5 (permalink)
chrissa Join Date: Jul 2003 Posts: 22	I believe that if you copy the persist.dat file in the \Program Files\Avaya\Site Administration\user folder from the old PC onto the new PC that should copy over all settings. The location of the user folder may vary if you installed to a different directory.

July 9th, 2003, 01:47 PM	#6 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	Thanks alot for the info. I will try this next time I program with ASA.

July 18th, 2003, 08:38 AM	#7 (permalink)
nhammer PBXtech SILVER 25+ posts Join Date: May 2003 Posts: 60	Thanks this worked great!!!! >>I believe that if you copy the persist.dat file in the \Program Files\Avaya\Site Administration\user folder from the old PC onto the new PC that should copy over all settings. The location of the user folder may vary if you installed to a different directory.

July 18th, 2003, 09:11 AM	#8 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	This sure makes life easier!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)