How can i stop sending extension number on internal call?

mtfs · July 7th, 2003, 09:57 PM

Is there a way to block the extension number from being displayed on an internal call?

tele234 · July 10th, 2003, 03:18 PM

by placing a , in front of the name (in name field) this blocks the directory from bring up the extension, but as far as I know there is no way to block internal to internal

nexSIP · July 10th, 2003, 06:04 PM

We use # in front of the name to block Directory listings.

tele234 · July 11th, 2003, 10:25 AM

kewl, did not know that the # sign in front also blocks the Directory, nice to know, But the , (comma) also blocks directory

ahays · July 11th, 2003, 12:28 PM

Actually, any special charater will prevent a directory listing, *, #, -, +, <underscore>, &, etc.

smithermang · July 14th, 2003, 11:47 AM

cool I did not know all of those would work.

chrissa · July 14th, 2003, 03:12 PM

We use an ! before the name to prevent it from coming up.

thomasq · July 18th, 2003, 01:35 PM

On the COS form change the " Client Room" field to "y" for the appropiate COS on you stations. It will display only the room number and if there is no room number defined on the station form it will only display the name.

tele234 · July 18th, 2003, 01:52 PM

well on our switch R 11 either of the last two items work, both name and number goes across when making internal station to station calls.. This might be release related, cause so far I have not been able to block name and extenison numbers from the display when calling station to station

smithermang · July 18th, 2003, 01:56 PM

I tested and same thing happened to me. I still got name and number.

hartmj · July 21st, 2003, 01:23 PM

On the change system-parameters hospitality form, you need to have "Display Room Information in Call Display?" set to "y". This is in addition to the COS change that thomasq suggested. You have to change both for it to work.

July 7th, 2003, 09:57 PM	#1 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	How can i stop sending extension number on internal call? Is there a way to block the extension number from being displayed on an internal call?

July 10th, 2003, 06:04 PM	#3 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	We use # in front of the name to block Directory listings. __________________ http://www.nexsip.com Communicate Openly and Freely

July 11th, 2003, 12:28 PM	#5 (permalink)
ahays Moderator Join Date: Jul 2003 Posts: 1,349	Actually, any special charater will prevent a directory listing, , #, -, +, <underscore>, &, etc. __________________ Al Hays, ACE, MCSE, CCNA* Homepage: http://www.jeral.com/ Training: http://www.jeral.com/avaya-learning.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Key programming on the Option 11c	trish	Meridian systems	4	April 5th, 2006 03:03 PM
Speed Dial in Opton 61c	smt	Meridian systems	6	March 24th, 2006 10:18 AM
Tearing down a call from an extension	aln	Definity Servers	2	July 15th, 2005 10:44 AM
Cross Talk on Internal Call	thargiss	Definity Servers	9	January 17th, 2005 08:39 AM
What's new un version 3.0 (2)	Tooqui	IP Office	0	August 4th, 2004 01:42 AM

July 10th, 2003, 03:18 PM	#2 (permalink)
tele234 PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 94	by placing a , in front of the name (in name field) this blocks the directory from bring up the extension, but as far as I know there is no way to block internal to internal

Remove advertisements Sponsored links
PBXtech.info Advertisement

July 11th, 2003, 10:25 AM	#4 (permalink)
tele234 PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 94	kewl, did not know that the # sign in front also blocks the Directory, nice to know, But the , (comma) also blocks directory

July 14th, 2003, 11:47 AM	#6 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	cool I did not know all of those would work.

July 14th, 2003, 03:12 PM	#7 (permalink)
chrissa Join Date: Jul 2003 Posts: 22	We use an ! before the name to prevent it from coming up.

July 18th, 2003, 01:35 PM	#8 (permalink)
thomasq Join Date: Jul 2003 Posts: 19	On the COS form change the " Client Room" field to "y" for the appropiate COS on you stations. It will display only the room number and if there is no room number defined on the station form it will only display the name.

July 18th, 2003, 01:52 PM	#9 (permalink)
tele234 PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 94	well on our switch R 11 either of the last two items work, both name and number goes across when making internal station to station calls.. This might be release related, cause so far I have not been able to block name and extenison numbers from the display when calling station to station

July 18th, 2003, 01:56 PM	#10 (permalink)
smithermang PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 150	I tested and same thing happened to me. I still got name and number.

July 21st, 2003, 01:23 PM	#11 (permalink)
hartmj Join Date: Jun 2003 Posts: 2	On the change system-parameters hospitality form, you need to have "Display Room Information in Call Display?" set to "y". This is in addition to the COS change that thomasq suggested. You have to change both for it to work.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)