Changing Audix Hunt group members

liquidvw · September 15th, 2005, 09:40 AM

G3 CM2.0 Intuity Audix R5.1

I have a new office that I need to connect to my existing. They have a DID range of 5XXX. This range does not overlap my existing dialplan except for my 12 audix hunt group members, which are 5300-5311.

Here is what I have done so far. I started with port 12 as a test. I wrote down the port 01CXXXX for x 5311. I removed the 12th member of hunt group 10 (AUDIX). I then x ported x 5311. I then added x 7962 and gave it port 01CXXXX. Then I added x 7962 back into hunt group 10.

I can call x 7962 directly and audix picks up, but if I call the hunt group number I won't choose port 12. What did I do wrong?

nstephens8 · September 15th, 2005, 10:51 AM

I can't find it, but there is something on the Intuity that you have to change for the Audix to recognize that extension as a Audix Hunt number.

Got to Voice System Administration / Voice Equipment, you will see the extensions listed.

How to chnage it, i don't remember.

liquidvw · September 15th, 2005, 11:04 AM

Yes. That was it.

Once on the voice equipment screen, I click actions, then assign/change, then pbx extensions to channel. I entered pbx extension 7962 channel 11 and enter.

Thank you very much

September 15th, 2005, 09:40 AM	#1 (permalink)
liquidvw PBXtech PLATINUM 300+ posts Join Date: Nov 2004 Posts: 354	Changing Audix Hunt group members G3 CM2.0 Intuity Audix R5.1 I have a new office that I need to connect to my existing. They have a DID range of 5XXX. This range does not overlap my existing dialplan except for my 12 audix hunt group members, which are 5300-5311. Here is what I have done so far. I started with port 12 as a test. I wrote down the port 01CXXXX for x 5311. I removed the 12th member of hunt group 10 (AUDIX). I then x ported x 5311. I then added x 7962 and gave it port 01CXXXX. Then I added x 7962 back into hunt group 10. I can call x 7962 directly and audix picks up, but if I call the hunt group number I won't choose port 12. What did I do wrong?

September 15th, 2005, 10:51 AM	#2 (permalink)
nstephens8 PBXtech SILVER 25+ posts Join Date: Feb 2005 Posts: 48	Re: Changing Audix Hunt group members I can't find it, but there is something on the Intuity that you have to change for the Audix to recognize that extension as a Audix Hunt number. Got to Voice System Administration / Voice Equipment, you will see the extensions listed. How to chnage it, i don't remember.

September 15th, 2005, 11:04 AM	#3 (permalink)
liquidvw PBXtech PLATINUM 300+ posts Join Date: Nov 2004 Posts: 354	Re: Changing Audix Hunt group members Yes. That was it. Once on the voice equipment screen, I click actions, then assign/change, then pbx extensions to channel. I entered pbx extension 7962 channel 11 and enter. Thank you very much

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiple Hunt Group Menbership	George	IP Office	1	March 2nd, 2006 07:20 AM
Changing the number for hunt groups	liquidvw	Definity Servers	2	July 19th, 2005 08:49 AM
What's new in Version 3.0	Tooqui	IP Office	0	August 4th, 2004 01:39 AM
Hunt Group Problem	sjered	IP Office	5	July 23rd, 2004 07:14 AM
Determining the extensions within a hunt group	Pace	IP Office	2	April 19th, 2004 07:10 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)