nexSIP

01A0504 MEDPROPT 513 24 08/12/12:42 08/12/12:42 10 0 10 a y
01A0501 MEDPROPT 513 24 08/12/12:42 08/12/12:42 8 0 8 a y
01A0505 MEDPROPT 513 24 08/12/12:42 08/12/12:42 8 0 8 a y
01A0506 MEDPROPT 513 24 08/12/12:42 08/12/12:42 8 0 8 a y
01A0507 MEDPROPT 513 24 08/12/12:42 08/12/12:42 9 0 9 a y
01A0501 MEDPROPT 769 5 08/12/12:42 08/12/12:42 1 0 1 a y
01A0504 MEDPROPT 769 5 08/12/12:42 08/12/12:42 1 0 1 a y
01A0505 MEDPROPT 769 5 08/12/12:42 08/12/12:42 1 0 1 a y
01A0506 MEDPROPT 769 5 08/12/12:42 08/12/12:42 1 0 1 a y
01A0507 MEDPROPT 769 5 08/12/12:42 08/12/12:42 1 0 1

Maintenance said the DSP is bad.. is that correct?

I tried upgrading hw3 from firmware 21 to 93. the status says it completed, but it never shows firmware 93.

any iders?

__________________
http://www.nexsip.com
Communicate Openly and Freely

eltorodeoro

you attempted to go straight from 21 to 93? i believe you have to step that, don't you? i forget exactly which board i had to do that with, but i'm pretty sure it was the medpro...

... yes, it was. step it up to 46, then you can take it to 93... follow the readmes -

ftp://ftp.avaya.com/incoming/Up1cku9...2302ap_f46.txt
ftp://ftp.avaya.com/incoming/Up1cku9...ap_v93_hv3.txt

download all the files listed below v46 and follow the instructions on the attached job-aid.

good luck!

Attached Files

TFTP_Upgrade_Process.doc (89.0 KB, 8 views)

PBXtech.info

 

nexSIP

groovy, thanks.

hope this fixes my DSP problem :)

__________________
http://www.nexsip.com
Communicate Openly and Freely

nexSIP

seeing how i cant ping the board in order to do the tftp procedure i guess thats a problem :)

__________________
http://www.nexsip.com
Communicate Openly and Freely

liquidvw

This probably won't work, but it may be worth a try. Plug a cross over cable from your laptop directly into the medpro, then try to ping it.