How do you set up a conf bridge?

mtfs · June 29th, 2003, 01:06 PM

Is it possible to set up a conf bridge on a G3 and if so how many people can conference.  I've heard you can do this but i can't figure out how to do it.

ambrosej · June 30th, 2003, 03:27 PM

You have to have Meet Me Conferencing and vectoring turned on in your customer options. I'm not sure what release Meet Me Conferencing came out with, but we just upgraded several of our PBXs to Multivantage R11 and Meet Me Conferencing was one of the features included in the upgrade. You'll also need an announcement card.

nexSIP · June 30th, 2003, 04:07 PM

R11 is the first release to do Meet-Me conferencing.
Its very limited. I can post instructions on how to set it up if you need.

mtfs · June 30th, 2003, 06:46 PM

If you could post the instructions that would be great.
Thanks

phoneguru · July 1st, 2003, 06:36 AM

The document is a PDF that wont fit here. however, here is a link to the download site. Also, meet-me-conferencing supports a total of six simultanious users, including the host.

ADMIN EDIT: pdf posted below

Admin · July 1st, 2003, 10:10 AM

Here is the document you refered to:

phoneguru · July 1st, 2003, 11:44 AM

Thanks for posting the doc. I'm new to forums and couldn't figure out how to attatch it.

mtfs · July 1st, 2003, 11:13 PM

Thanks alot, just what i was looking for. This is great.

June 29th, 2003, 01:06 PM	#1 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	How do you set up a conf bridge? Is it possible to set up a conf bridge on a G3 and if so how many people can conference.  I've heard you can do this but i can't figure out how to do it.

June 30th, 2003, 04:07 PM	#3 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	R11 is the first release to do Meet-Me conferencing. Its very limited. I can post instructions on how to set it up if you need. __________________ http://www.nexsip.com Communicate Openly and Freely

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FAX vs. 2500 in Set Type field	nhammer	Definity Servers	1	November 17th, 2005 10:48 AM
Set outgoing CIDname	mbegan	IP Office	6	October 9th, 2005 05:18 PM
web access on IP Phones	MaltMan1	Definity Servers	7	August 23rd, 2005 09:07 AM
Power confrence / logging into bridge	wdelphia	IP Office	3	September 16th, 2004 11:17 AM
Cannot dial out on PRI set for NI-2	jisbell	Definity Servers	2	March 26th, 2004 12:11 PM

June 30th, 2003, 03:27 PM	#2 (permalink)
ambrosej Join Date: Jun 2003 Posts: 2	You have to have Meet Me Conferencing and vectoring turned on in your customer options. I'm not sure what release Meet Me Conferencing came out with, but we just upgraded several of our PBXs to Multivantage R11 and Meet Me Conferencing was one of the features included in the upgrade. You'll also need an announcement card.

Remove advertisements Sponsored links
PBXtech.info Advertisement

June 30th, 2003, 06:46 PM	#4 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	If you could post the instructions that would be great. Thanks

July 1st, 2003, 06:36 AM	#5 (permalink)
phoneguru Join Date: Jul 2003 Posts: 5	The document is a PDF that wont fit here. however, here is a link to the download site. Also, meet-me-conferencing supports a total of six simultanious users, including the host. ADMIN EDIT: pdf posted below

July 1st, 2003, 11:44 AM	#7 (permalink)
phoneguru Join Date: Jul 2003 Posts: 5	Thanks for posting the doc. I'm new to forums and couldn't figure out how to attatch it.

July 1st, 2003, 11:13 PM	#8 (permalink)
mtfs PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 132	Thanks alot, just what i was looking for. This is great.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)