Definity G3i ISDN-PRI connection to Cisco 2801

Connery · March 9th, 2005, 04:06 PM

Having trouble getting the signaling channel up on a ISDN-Pri connection between a Cisco 2801 integrated services router and my Gefinity G3i running on release 9. Can any one provide me with configuration settings for the G3i and possibly the Cisco to get them both in sync. The board being used in the G3i is a TN464. I am getting a CD light on the router so the physical connection between the two is correct.

stubborne · March 14th, 2005, 09:54 AM

Here's a DS1 config connected to a 7200 class router - should be the same...

DS1 CIRCUIT PACK
Location: 11A09 Name: VGAnalog
Bit Rate: 1.544 Line Coding: b8zs
Line Compensation: 1 Framing Mode: esf
Signaling Mode: isdn-pri
Connect: line-side
TN-C7 Long Timers? n Country Protocol: 1
Interworking Message: PROGress Protocol Version: a
Interface Companding: mulaw CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz

Slip Detection? n Near-end CSU Type: other
Alarm When PRI Endpoint Detached? y

oni_lucent · March 14th, 2005, 11:53 AM

Hi,

It is configured like that if you are in the States, but if you are in Europe it´s a little bit diferent...:devil:

Cheers

Bruno Santos
OniTelecom

stubborne · March 14th, 2005, 12:31 PM

Quote:

Originally Posted by oni_lucent

Hi,

It is configured like that if you are in the States, but if you are in Europe it´s a little bit diferent...:devil:

Cheers

Bruno Santos
OniTelecom

So it is!!

March 9th, 2005, 04:06 PM	#1 (permalink)
Connery Join Date: Mar 2005 Posts: 3	Definity G3i ISDN-PRI connection to Cisco 2801 Having trouble getting the signaling channel up on a ISDN-Pri connection between a Cisco 2801 integrated services router and my Gefinity G3i running on release 9. Can any one provide me with configuration settings for the G3i and possibly the Cisco to get them both in sync. The board being used in the G3i is a TN464. I am getting a CD light on the router so the physical connection between the two is correct.

March 14th, 2005, 09:54 AM	#2 (permalink)
stubborne PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 401	Re: Definity G3i ISDN-PRI connection to Cisco 2801 Here's a DS1 config connected to a 7200 class router - should be the same... DS1 CIRCUIT PACK Location: 11A09 Name: VGAnalog Bit Rate: 1.544 Line Coding: b8zs Line Compensation: 1 Framing Mode: esf Signaling Mode: isdn-pri Connect: line-side TN-C7 Long Timers? n Country Protocol: 1 Interworking Message: PROGress Protocol Version: a Interface Companding: mulaw CRC? n Idle Code: 11111111 DCP/Analog Bearer Capability: 3.1kHz Slip Detection? n Near-end CSU Type: other Alarm When PRI Endpoint Detached? y __________________ Stu

March 14th, 2005, 11:53 AM	#3 (permalink)
oni_lucent PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 138	Re: Definity G3i ISDN-PRI connection to Cisco 2801 Hi, It is configured like that if you are in the States, but if you are in Europe it´s a little bit diferent...:devil: Cheers Bruno Santos OniTelecom

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ISDN PRI connecting to POLYCOM VS FX	ten8ous1	Definity Servers	7	February 18th, 2008 12:18 PM
Denial Event 1164	G3SIMAINT	Definity Servers	7	February 18th, 2006 08:31 AM
Definity G3 to Cisco	naund	Definity Servers	3	July 12th, 2005 11:20 PM
TN767 and ISDN PRI	Grig	Definity Servers	3	July 11th, 2005 10:13 PM
SPN's Not working on Option 61c	niemannl	Meridian systems	9	April 11th, 2005 11:45 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)