phonetech

I finally was able to program loudspeaker paging using aux trunk. I actually programmed it in two different ways. One by using a trunk group with a CPE parameter on port 03 TAC 657.
The second one by using loudspeaker paging on port 4 TAC 658.
Ports 1 & 2 are used for MOH.

I can access either port now without any problems, however I don't get an audio on a T&R pair. The Avaya's manual says that the aux trk can be used for paging without the Universal Coupler and tells you to strap S to SZ, S1 to SZ1.

I tried it both ways, with straps and without and I still can't get an audio.
I have a LUUPAM as a paging adapter that works fine, I've tested it on a loop start trunk.

Thanks
Yury

__________________
Yury