Trying to add a loudspeaker paging on TN763D

phonetech · February 21st, 2005, 02:03 PM

I am trying to add a loudspeaker paging to the S8500, TN763D board, AUX type trunk port.
Followed the manual, and did the following:

LOUDSPEAKER PAGING

CDR? n
Voice Paging Timeout (sec): 60
Code Calling Playing Cycles:

PAGING PORT ASSIGNMENTS
Voice Paging Code Calling
Zone Port TAC COR TN TAC COR TN Location:
1: 01A0804 656 1 1 1 WAREHOUSE
2: 1 1 PAGING
3: 1 1 PAGING
4: 1 1 PAGING
5: 1 1 PAGING
6: 1 1 PAGING
7: 1 1 PAGING
8: 1 1 PAGING
9: 1 1 PAGING
ALL: 1 1

When I dial TAC 656, I get a dial tone, looks like it is waiting for more digits.
Dialing one more digit (any digit) stops the dialtone.
I used trace to follow the progress, but it doesn't show anything.

I also tried to build a loop start trunk group for that AUX port, but the trunk group wouldn't accept that port.
Any ideas?
Thanks

Yury

nstephens8 · February 25th, 2005, 04:44 PM

I know this sounds stupid, but have you checked if there is a dial access code for paging in feature-access-codes?

phonetech · February 28th, 2005, 11:58 AM

I got it to work. Found out that I had to make one change in system parameters, as well as to get rid of UPAM.

February 21st, 2005, 02:03 PM	#1 (permalink)
phonetech Join Date: Jan 2005 Posts: 11	Trying to add a loudspeaker paging on TN763D I am trying to add a loudspeaker paging to the S8500, TN763D board, AUX type trunk port. Followed the manual, and did the following: LOUDSPEAKER PAGING CDR? n Voice Paging Timeout (sec): 60 Code Calling Playing Cycles: PAGING PORT ASSIGNMENTS Voice Paging Code Calling Zone Port TAC COR TN TAC COR TN Location: 1: 01A0804 656 1 1 1 WAREHOUSE 2: 1 1 PAGING 3: 1 1 PAGING 4: 1 1 PAGING 5: 1 1 PAGING 6: 1 1 PAGING 7: 1 1 PAGING 8: 1 1 PAGING 9: 1 1 PAGING ALL: 1 1 When I dial TAC 656, I get a dial tone, looks like it is waiting for more digits. Dialing one more digit (any digit) stops the dialtone. I used trace to follow the progress, but it doesn't show anything. I also tried to build a loop start trunk group for that AUX port, but the trunk group wouldn't accept that port. Any ideas? Thanks Yury __________________ Yury

February 25th, 2005, 04:44 PM	#2 (permalink)
nstephens8 PBXtech SILVER 25+ posts Join Date: Feb 2005 Posts: 48	Re: Trying to add a loudspeaker paging on TN763D I know this sounds stupid, but have you checked if there is a dial access code for paging in feature-access-codes?

February 28th, 2005, 11:58 AM	#3 (permalink)
phonetech Join Date: Jan 2005 Posts: 11	Re: Trying to add a loudspeaker paging on TN763D I got it to work. Found out that I had to make one change in system parameters, as well as to get rid of UPAM. __________________ Yury

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Releasing or Pulling Customers out of Paging	probchild	Definity Servers	4	March 23rd, 2005 01:57 PM
Paging on TN763 without the universal coupler	phonetech	Definity Servers	0	February 23rd, 2005 08:02 AM
4412D+ phones in a paging group.	mallgood	IP Office	0	February 3rd, 2005 02:53 PM
Paging problem	phonetech	Definity Servers	2	January 26th, 2005 08:27 AM
Instructions for Universal Paging Coupler 909	mindyw	Definity Servers	1	March 23rd, 2004 10:08 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)