Outgoing Trunk to Trunk transfer

ggde · February 16th, 2005, 12:25 PM

I am unable to transfer on outgoing trunk to trunk call, but can transfer an incoming trunk to an outgoing trunk call. I've checked CORs but it still fails.

nexSIP · February 16th, 2005, 02:27 PM

check your COS. truck to truck transfer

ggde · February 16th, 2005, 03:03 PM

Thanks for your reply...Trk to Trk override was set to "y"

nexSIP · February 16th, 2005, 03:12 PM

so you have 2 outbound calls on your phone and you want to bridge them?

ggde · February 16th, 2005, 04:13 PM

Yes, basically I call someone off net and transfer them to another off net number. It disconnects after the 1st ring. However I can receive a call from an off net site and transfer that call off net, successfully.
Trunk to trunk transfer is enabled.

oni_lucent · February 17th, 2005, 05:44 AM

Hi,

Have you checked the COS... " Restrict Call-Fwd Off Net "

Cheers,

Bruno Santos
OniTelecom S.A
www.oni.pt

ggde · February 17th, 2005, 11:13 AM

I think I've found the problem but have not tested it as of yet. Inward supervison is set to yes, but outward was set to no on the trunk group. I don't think you can do a trk-trk xfer without trk grp disconnect supv being set to yes. I'll let you know.

oni_lucent · February 17th, 2005, 12:08 PM

I forgot to mention, have you tried doing " list trace st xxxx ", maybe it can tell you something more

Hope it helps

Bruno Santos
OniTelecom

ggde · February 17th, 2005, 01:23 PM

The problem was resolved by enabling "disconnect supervision"

jsena · February 22nd, 2005, 02:02 PM

Disconnect Supervision - Out? y
"WARNING: Setting this field to "y" may result in trunk lock-ups "

I'm assuming this is saying "If you connect two calls and you're not on the call, you have no control over when (or if ever) the call gets hung up"... as opposed to "If you do this your PRI may stop accepting calls and you will need to find new employment". Right?

ruudsplint · February 23rd, 2005, 06:01 AM

Thanx, was looking for the same solution!

February 16th, 2005, 12:25 PM	#1 (permalink)
ggde Join Date: Nov 2004 Posts: 5	Outgoing Trunk to Trunk transfer I am unable to transfer on outgoing trunk to trunk call, but can transfer an incoming trunk to an outgoing trunk call. I've checked CORs but it still fails.

February 16th, 2005, 02:27 PM	#2 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	Re: Outgoing Trunk to Trunk transfer check your COS. truck to truck transfer __________________ http://www.nexsip.com Communicate Openly and Freely

February 16th, 2005, 03:03 PM	#3 (permalink)
ggde Join Date: Nov 2004 Posts: 5	Re: Outgoing Trunk to Trunk transfer Thanks for your reply...Trk to Trk override was set to "y"

February 16th, 2005, 03:12 PM	#4 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	Re: Outgoing Trunk to Trunk transfer so you have 2 outbound calls on your phone and you want to bridge them? __________________ http://www.nexsip.com Communicate Openly and Freely

February 16th, 2005, 04:13 PM	#5 (permalink)
ggde Join Date: Nov 2004 Posts: 5	Re: Outgoing Trunk to Trunk transfer Yes, basically I call someone off net and transfer them to another off net number. It disconnects after the 1st ring. However I can receive a call from an off net site and transfer that call off net, successfully. Trunk to trunk transfer is enabled.

Remove advertisements
PBXtech.info Advertisement	Sponsored links

February 17th, 2005, 05:44 AM	#6 (permalink)
oni_lucent PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 138	Re: Outgoing Trunk to Trunk transfer Hi, Have you checked the COS... " Restrict Call-Fwd Off Net " Cheers, Bruno Santos OniTelecom S.A www.oni.pt

February 17th, 2005, 11:13 AM	#7 (permalink)
ggde Join Date: Nov 2004 Posts: 5	Re: Outgoing Trunk to Trunk transfer I think I've found the problem but have not tested it as of yet. Inward supervison is set to yes, but outward was set to no on the trunk group. I don't think you can do a trk-trk xfer without trk grp disconnect supv being set to yes. I'll let you know.

February 17th, 2005, 12:08 PM	#8 (permalink)
oni_lucent PBXtech GOLD 100+ posts Join Date: Jun 2003 Posts: 138	Re: Outgoing Trunk to Trunk transfer I forgot to mention, have you tried doing " list trace st xxxx ", maybe it can tell you something more Hope it helps Bruno Santos OniTelecom

February 17th, 2005, 01:23 PM	#9 (permalink)
ggde Join Date: Nov 2004 Posts: 5	Re: Outgoing Trunk to Trunk transfer The problem was resolved by enabling "disconnect supervision"

February 22nd, 2005, 02:02 PM	#10 (permalink)
jsena PBXtech GOLD 100+ posts Join Date: Mar 2004 Posts: 108	Re: Outgoing Trunk to Trunk transfer Disconnect Supervision - Out? y "WARNING: Setting this field to "y" may result in trunk lock-ups " I'm assuming this is saying "If you connect two calls and you're not on the call, you have no control over when (or if ever) the call gets hung up"... as opposed to "If you do this your PRI may stop accepting calls and you will need to find new employment". Right? Last edited by jsena; February 22nd, 2005 at 02:05 PM.

February 23rd, 2005, 06:01 AM	#11 (permalink)
ruudsplint PBXtech SILVER 25+ posts Join Date: Oct 2004 Posts: 43	Re: Outgoing Trunk to Trunk transfer Thanx, was looking for the same solution! __________________ Ruud Splint ruud.splint@imtech.nl www.imtech.nl

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trunk Audit	Stan Lee	Definity Servers	7	April 7th, 2006 07:32 PM
Trunk to Trunk transfer	liquidvw	Definity Servers	3	May 26th, 2005 10:10 AM
analoge trunk to tunk transfer	mahmoud	IP Office	3	October 20th, 2004 10:49 AM
COS trunk to trunk transfer	minniemouse	Definity Servers	3	July 19th, 2004 11:07 AM
Call transfer with two outgoing calls	aln	IP Office	2	March 10th, 2004 03:22 AM