POTS kine over fiber

smcmrk · November 30th, 2004, 05:51 PM

I have an epn next door at a different address and need to get a POTS line from the building next door to connect to a CO board in the main building in the ppn. There is a fiber connection between the two buildings. Is there a way to run the POTS line over the fiber so I can connect it to the CO board in the ppn?

rocky55 · November 30th, 2004, 06:02 PM

Why not just have the local carrier move it to the building you need it in ? It will make it alot easier for the next guy I promise. Don't you have tie cables between the buildings. It's not something I've ever done, or even thought of doing but maybe there is a way.

smcmrk · November 30th, 2004, 06:30 PM

I need it to stay in the same building. I am setting up 911 routing and it needs to stay in that address so they can tell where the 911 call originated. If I move it, it will look like it is coming from the main building if 911 is dialed.

ahays · November 30th, 2004, 06:44 PM

Quote:

Originally Posted by smcmrk

I have an epn next door at a different address and need to get a POTS line from the building next door to connect to a CO board in the main building in the ppn. There is a fiber connection between the two buildings. Is there a way to run the POTS line over the fiber so I can connect it to the CO board in the ppn?

Why don't you just put a CO-Trunk card in the EPN? I just looked on eBay and there was an auction ending in 1 hour with a TN747B at $9.99 opening bid and no one bidding.

regs,

.al.

November 30th, 2004, 05:51 PM	#1 (permalink)
smcmrk Join Date: Feb 2004 Posts: 11	POTS kine over fiber I have an epn next door at a different address and need to get a POTS line from the building next door to connect to a CO board in the main building in the ppn. There is a fiber connection between the two buildings. Is there a way to run the POTS line over the fiber so I can connect it to the CO board in the ppn?

November 30th, 2004, 06:02 PM	#2 (permalink)
rocky55 Registered User Join Date: Nov 2004 Posts: 28	Re: POTS kine over fiber Why not just have the local carrier move it to the building you need it in ? It will make it alot easier for the next guy I promise. Don't you have tie cables between the buildings. It's not something I've ever done, or even thought of doing but maybe there is a way.

November 30th, 2004, 06:30 PM	#3 (permalink)
smcmrk Join Date: Feb 2004 Posts: 11	Re: POTS kine over fiber I need it to stay in the same building. I am setting up 911 routing and it needs to stay in that address so they can tell where the 911 call originated. If I move it, it will look like it is coming from the main building if 911 is dialed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
adding a G650 via fiber to a center stage	watasav	Definity Servers	6	March 8th, 2006 11:58 AM
Automatic rerouting of outbound calls to POTS lines if T1 PRI goes down	chris0754	IP Office	1	February 17th, 2006 10:57 AM
Need Voice,Data and Fiber Wiring done in Texas?	Glenn_dawg	Vendors (Discussion and Advertisments)	0	January 7th, 2006 09:49 PM
fax machines currently POTS lines	liquidvw	Definity Servers	2	October 9th, 2005 11:09 AM
Optical fiber with IPO	reddyrh	IP Office	1	October 14th, 2004 07:46 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)