Command to display Comm Mgr version.

fataldata · November 8th, 2004, 08:10 AM

Does anyone know a command to display the version of Comm Manager. Like 2.0 or 2.1? Haven't seen anything for this in ASA or the terminal, could it be in the Linux OS somewhere?

ISA_Flee · November 8th, 2004, 10:46 AM

"Display system-parameters customer"

Page 1 shows version info. V12 is CM2

dherve · November 8th, 2004, 12:27 PM

A better command is newterm to chose a new terminal.
I will the software version and then to really understand the CM you have, you should understand that V12 equal to CM2.x and V11 is CM1.2 or CM1.3.x. The x is refering to the load you have.
CM1.3 is the load 526
CM1.3.1 is the load 530
CM1.3.2 is the load 536
CM2.0 is the load 219
CM2.0.1 is the load 221
CM2.0.2 is the load 224
CM2.1 is the load 411
CM2.1.1 is the load 414

cg111 · November 8th, 2004, 09:23 PM

Use the brower interface to the system (provided you have an S8300,S8500, etc.). There is a link that allows you to display the version you are running and the previous version too.

fataldata · November 9th, 2004, 02:45 PM

Thanks all for the replies. I used the in Sys Parameters I have V12 and using the newterm option it shows load 411.

All of this is very helpful since my boss who bought the system in a remote location was told it was version 2.0 but from your info I am seeing that either it was upgraded or that info was erroneous.
Load 411 being CM2.1

Can't use the browser option since the IS side of the department practices a rather strict security policy restricting any web access to the pbx. This may change if I can convince them to simply set up routing policies which only allow some pc's to access the web page.

Thanks again.

November 8th, 2004, 08:10 AM	#1 (permalink)
fataldata PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 308	Command to display Comm Mgr version. Does anyone know a command to display the version of Comm Manager. Like 2.0 or 2.1? Haven't seen anything for this in ASA or the terminal, could it be in the Linux OS somewhere? __________________ Systems In Use: S8700 CM3.0 and S8710 CM3.1.1

November 8th, 2004, 10:46 AM	#2 (permalink)
ISA_Flee PBXtech SILVER 25+ posts Join Date: Mar 2004 Posts: 68	Re: Command to display Comm Mgr version. "Display system-parameters customer" Page 1 shows version info. V12 is CM2

November 8th, 2004, 12:27 PM	#3 (permalink)
dherve PBXtech SILVER 25+ posts Join Date: Sep 2004 Posts: 60	Re: Command to display Comm Mgr version. A better command is newterm to chose a new terminal. I will the software version and then to really understand the CM you have, you should understand that V12 equal to CM2.x and V11 is CM1.2 or CM1.3.x. The x is refering to the load you have. CM1.3 is the load 526 CM1.3.1 is the load 530 CM1.3.2 is the load 536 CM2.0 is the load 219 CM2.0.1 is the load 221 CM2.0.2 is the load 224 CM2.1 is the load 411 CM2.1.1 is the load 414

November 8th, 2004, 09:23 PM	#4 (permalink)
cg111 PBXtech SILVER 25+ posts Join Date: Oct 2004 Posts: 28	Re: Command to display Comm Mgr version. Use the brower interface to the system (provided you have an S8300,S8500, etc.). There is a link that allows you to display the version you are running and the previous version too.

November 9th, 2004, 02:45 PM	#5 (permalink)
fataldata PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 308	Re: Command to display Comm Mgr version. Thanks all for the replies. I used the in Sys Parameters I have V12 and using the newterm option it shows load 411. All of this is very helpful since my boss who bought the system in a remote location was told it was version 2.0 but from your info I am seeing that either it was upgraded or that info was erroneous. Load 411 being CM2.1 Can't use the browser option since the IS side of the department practices a rather strict security policy restricting any web access to the pbx. This may change if I can convince them to simply set up routing policies which only allow some pc's to access the web page. Thanks again. __________________ Systems In Use: S8700 CM3.0 and S8710 CM3.1.1

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode