ISDN problem

Davide · August 23rd, 2004, 03:24 AM

Hi All
I have a problem with my PBX definity and ISDN flow.
It is like if flow ISDN it were bewitched and calls in escape cannot be made. In order to resolve the problem I must reset the PBX definity.
In the directory of the alarms of the PBX I have ISDN_SGR Warning out. This problem happens someone periodically. Is there someone who gives me information to rersolve this problem?

Thank you
Davide

savvasc · August 23rd, 2004, 05:01 AM

I am not sure that I got it right, but it seems that you have time synchronization problems. Set the synchronization to the DS1 board that the PRI is connected.

Use the commands: Status synchronization, Change synchronization, Set synchronization UUCSS

fataldata · August 23rd, 2004, 12:50 PM

Not sure I understand the question completely. We get this error on an ISDN trunk we use for our Video Conferencing Equipment. It is caused when the users turn off the video equipment.

Davide · August 24th, 2004, 03:19 AM

Thank you, but I don't understand this command, sorry but I have a little experience on this platform.
I used this command and the alarm message from :ISDN- SGR warning out is passed to ISDN -SGR warning IN but I don't understand what's happen. Can you explain what this command do?
Thank you very much

bye Davide

Quote:

Originally Posted by savvasc

I am not sure that I got it right, but it seems that you have time synchronization problems. Set the synchronization to the DS1 board that the PRI is connected.

Use the commands: Status synchronization, Change synchronization, Set synchronization UUCSS

August 23rd, 2004, 03:24 AM	#1 (permalink)
Davide Join Date: Mar 2004 Posts: 8	ISDN problem Hi All I have a problem with my PBX definity and ISDN flow. It is like if flow ISDN it were bewitched and calls in escape cannot be made. In order to resolve the problem I must reset the PBX definity. In the directory of the alarms of the PBX I have ISDN_SGR Warning out. This problem happens someone periodically. Is there someone who gives me information to rersolve this problem? Thank you Davide

August 23rd, 2004, 05:01 AM	#2 (permalink)
savvasc PBXtech GOLD 100+ posts Join Date: May 2004 Posts: 125	Re: ISDN problem I am not sure that I got it right, but it seems that you have time synchronization problems. Set the synchronization to the DS1 board that the PRI is connected. Use the commands: Status synchronization, Change synchronization, Set synchronization UUCSS

August 23rd, 2004, 12:50 PM	#3 (permalink)
fataldata PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 315	Re: ISDN problem Not sure I understand the question completely. We get this error on an ISDN trunk we use for our Video Conferencing Equipment. It is caused when the users turn off the video equipment. __________________ Systems In Use: S8700 CM3.0 and S8710 CM3.1.1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Denial Event 1164	G3SIMAINT	Definity Servers	7	February 18th, 2006 08:31 AM
Telco/Latency Problem	sdak	IP Office	0	November 18th, 2005 09:02 AM
Delay in ISDN calls	JPWynn	Definity Servers	0	October 26th, 2005 01:18 PM
SPN's Not working on Option 61c	niemannl	Meridian systems	9	April 11th, 2005 11:45 AM
CFWD to external charging problem	hmursal152	Meridian systems	0	July 17th, 2004 01:00 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)