PRI with Prologix G3csi v6

jfarris88 · May 25th, 2004, 08:26 AM

We ordered two PRIs through Verizon to replace our Flexpath T1s and have Definity Prologix G3csiV6. with a TN464F card. Just want to make sure that incoming and outgoing ANI will be supported on our system.

Pardon the question - I am new to telcoms and a bit nervous.

We also have account codes set up through AT&T. In order to place a long distance call, a valid account code must be entered. I am not sure how this is set up on our side through the switch and would appreciate any information you could give me to check this and if it will be transferrable through the PRIs.

nexSIP · May 25th, 2004, 09:08 AM

the TN464 card works well with PRI. you will be able to configure your trunk to send ANI.

Your LD codes will work same as before, however you can also do that with your PBX.

May 25th, 2004, 08:26 AM	#1 (permalink)
jfarris88 Join Date: May 2004 Posts: 3	PRI with Prologix G3csi v6 We ordered two PRIs through Verizon to replace our Flexpath T1s and have Definity Prologix G3csiV6. with a TN464F card. Just want to make sure that incoming and outgoing ANI will be supported on our system. Pardon the question - I am new to telcoms and a bit nervous. We also have account codes set up through AT&T. In order to place a long distance call, a valid account code must be entered. I am not sure how this is set up on our side through the switch and would appreciate any information you could give me to check this and if it will be transferrable through the PRIs.

May 25th, 2004, 09:08 AM	#2 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	Re: PRI with Prologix G3csi v6 the TN464 card works well with PRI. you will be able to configure your trunk to send ANI. Your LD codes will work same as before, however you can also do that with your PBX. __________________ http://www.nexsip.com Communicate Openly and Freely

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRI setup assistance	nfarooqui	Definity Servers	6	August 23rd, 2005 04:25 PM
Pri	cww30040	Merlin Systems	2	February 28th, 2005 09:28 PM
Splitting PRI Channels for Fax Sever. Newbie. Help..	hboogz	Merlin Systems	1	February 22nd, 2005 05:11 PM
Prologix G3CSIV11-can u split PRI	ncg3pbx	Definity Servers	2	February 18th, 2005 11:01 AM
PRI Printout on Option 61 / RDB and TNB	mtfs	Meridian systems	0	July 4th, 2003 03:54 PM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)