Definity Networking DCS+

savvasc · May 11th, 2004, 11:59 PM

The name/number of a caller in Switch1 is displayed on the set of the called party on Switch2. However, if there is an ouside line (e.g number 212-860 xxxx) to switch1 and the call is transfered to someone in Switch2, the trunk name is displayed and not the orinanalcaller (e.g 212-860 xxxx). Note I am using DCS+ over IP

nexSIP · May 22nd, 2004, 08:45 AM

is your trunk set up so send the ANI?

savvasc · May 24th, 2004, 12:00 AM

Thanks for your reply. The trunk type is "isdn", not "tie". There is no field in the trunk for ANI. I just set the "send name" and "send number" in the tunk administration. In the manual for IP Trunks, the trunks should be administered as "isdn" type. Where exactly should I set the ANI?

May 11th, 2004, 11:59 PM	#1 (permalink)
savvasc PBXtech GOLD 100+ posts Join Date: May 2004 Posts: 121	Definity Networking DCS+ in G3siV11 The name/number of a caller in Switch1 is displayed on the set of the called party on Switch2. However, if there is an ouside line (e.g number 212-860 xxxx) to switch1 and the call is transfered to someone in Switch2, the trunk name is displayed and not the orinanalcaller (e.g 212-860 xxxx). Note I am using DCS+ over IP Last edited by savvasc; May 19th, 2004 at 03:47 AM.

May 22nd, 2004, 08:45 AM	#2 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	Re: Definity Networking DCS+ in G3siV11 is your trunk set up so send the ANI? __________________ http://www.nexsip.com Communicate Openly and Freely

May 24th, 2004, 12:00 AM	#3 (permalink)
savvasc PBXtech GOLD 100+ posts Join Date: May 2004 Posts: 121	Re: Definity Networking DCS+ (G3siV11) Thanks for your reply. The trunk type is "isdn", not "tie". There is no field in the trunk for ANI. I just set the "send name" and "send number" in the tunk administration. In the manual for IP Trunks, the trunks should be administered as "isdn" type. Where exactly should I set the ANI?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Definity G3si V9 Calling Name Display	rcfoltz	Definity Servers	1	September 8th, 2005 10:07 AM
IP office to Definity cont.	sgates	IP Office	4	December 22nd, 2004 01:01 PM
Connecting Videoconferencing to Definity	njodonnell	Definity Servers	2	October 13th, 2004 10:30 PM
Definity One	Cephas	Definity Servers	7	May 3rd, 2004 01:06 PM
DCS over IP?	navajojl	Definity Servers	2	January 8th, 2004 09:49 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)