travdawg

Does anyone know where to find the ISDN Denial Event error descriptions?

tweege

i beleive i had that same one a while back when trying to network a magix back to my definity. i called the helpline and they told me that that code meant the far end was dropping the call for whatever reason. ended up that all my pri trunks on the magix end were in a maintenance busy state. as soon as i released them the trunks started working.

PBXtech.info

 

bordeaux

HI, I am getting the same error when I tried to dial a cell phone from London to Buenos Aires.

11:58:00 active station 4403 cid 0x9f8
11:58:08 dial 9005499154583
11:58:08 term trunk-group 1 cid 0x9f8
11:58:19 dial 9005499154583350#
11:58:19 route-pattern 1 preference 1 cid 0x9f8
11:58:19 seize trunk-group 1 member 19 cid 0x9f8
11:58:19 Setup digits 005499154583350#
11:58:19 Calling Number & Name NO-CPNumber Bordeaux
11:58:19 Proceed trunk-group 1 member 19 cid 0x9f8
11:58:21 denial event 1164: ISDN reject D2=DG/LOC/CV D1=0x6107 D2=0x401
11:58:21 idle trunk-group 1 member 19 cid 0x9f8
11:58:25 idle station 4403 cid 0x9f8

If I dial a normal phone it works fine and it uses the same route-pattern. Any ideas?

stubborne

Try sending CPN too, see if it works that way.

__________________
Stu

ahays

This thread may be applicable: Cannot dial out on PRI set for NI-2

__________________
Al Hays, ACE, MCSE, CCNA
Homepage: http://www.jeral.com/
Training: http://www.jeral.com/avaya-learning.html