TN750C Announcement

papagigo · February 26th, 2004, 05:01 AM

I forgot to add a data to allow me to save my announcements ( TN750 board,)
Can I add it after the fact and still keep the announcement in tact?
How long will it take to do the save on a G3si DUPLICATED?

Thanks Mike

nexSIP · February 26th, 2004, 03:02 PM

Im confused at to what you are trying to do.
The TN750C is the old announcment board where you have to record via telephone to the board.
Once recorded it should be available immediatly (well as soon as its doing processing the recording)

bharris · February 26th, 2004, 05:57 PM

The system needs to have NETCON data ports defined and then you can save announcements to the flash card with the command Save Annc. This command will take about 40 minutes to complete.

ko_glass · February 27th, 2004, 06:07 PM

Go ahead and add your Data Moduel for your TN 750C. It should not be a problem to add it anytime. THen you will be able to save your announcements to you Tape or disk.

dickyam · May 31st, 2007, 11:27 AM

can we backup announcements from this board TN750C? and/or transfer to a VAL board? how?

thanks...

martinyoung · May 31st, 2007, 01:09 PM

You will need to re-record them, the VAL uses a different format.

dickyam · May 31st, 2007, 03:17 PM

what we're already doing.. whew... how i wish there's a better way..:(

thanks marty...

February 26th, 2004, 05:01 AM	#1 (permalink)
papagigo Join Date: Jan 2004 Posts: 10	TN750C Announcement I forgot to add a data to allow me to save my announcements ( TN750 board,) Can I add it after the fact and still keep the announcement in tact? How long will it take to do the save on a G3si DUPLICATED? Thanks Mike

February 26th, 2004, 03:02 PM	#2 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	Re: TN750C Announcement Im confused at to what you are trying to do. The TN750C is the old announcment board where you have to record via telephone to the board. Once recorded it should be available immediatly (well as soon as its doing processing the recording)

February 26th, 2004, 05:57 PM	#3 (permalink)
bharris Join Date: Jul 2003 Posts: 18	Re: TN750C Announcement The system needs to have NETCON data ports defined and then you can save announcements to the flash card with the command Save Annc. This command will take about 40 minutes to complete.

February 27th, 2004, 06:07 PM	#4 (permalink)
ko_glass PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 63	Re: TN750C Announcement Go ahead and add your Data Moduel for your TN 750C. It should not be a problem to add it anytime. THen you will be able to save your announcements to you Tape or disk.

May 31st, 2007, 11:27 AM	#5 (permalink)
dickyam PBXtech SILVER 25+ posts Join Date: Oct 2005 Posts: 35	Re: TN750C Announcement can we backup announcements from this board TN750C? and/or transfer to a VAL board? how? thanks... Last edited by dickyam; May 31st, 2007 at 11:30 AM.

Remove advertisements
PBXtech.info Advertisement	Sponsored links

May 31st, 2007, 01:09 PM	#6 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,435	Re: TN750C Announcement You will need to re-record them, the VAL uses a different format. __________________ Marty Retired Avaya DSIC tech

May 31st, 2007, 03:17 PM	#7 (permalink)
dickyam PBXtech SILVER 25+ posts Join Date: Oct 2005 Posts: 35	Re: TN750C Announcement what we're already doing.. whew... how i wish there's a better way..:( thanks marty...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setup Definity Prologix ACM 3.0 for TN750C	lopell	Definity Servers	4	November 2nd, 2005 04:32 AM
tn750c announcement question G3siV6	jimmy993	Definity Servers	3	September 28th, 2004 10:54 AM
Announcement slots TN750c card	kjmaltby	Definity Servers	5	September 8th, 2004 11:00 AM
Selling 2 TN750C Announcement Cards	BigMike	Vendors (Discussion and Advertisments)	0	May 24th, 2004 10:16 AM
This document will explain how to program a vector to play back the extension you are	nexSIP	Definity Servers	18	July 30th, 2003 04:22 PM