trunk DNIs

tek · January 30th, 2004, 10:52 AM

is there a way to show the inbound DNIS coming though a ISDN PRI?

ahays · January 31st, 2004, 07:34 AM

Quote:

Originally Posted by tek

is there a way to show the inbound DNIS coming though a ISDN PRI?

Depending on your version: list trace tac ###

regs,

.al.

MartenKL · December 2nd, 2004, 06:19 AM

I guess tek is asking for dnis information within the isdn protocol and not as a trace for debugging purposes, I at least have that problem, that the definity won't send DNIS information to my dialogic board. I can even get UUI to work so everything in my protocol settings should be right but I suspect avaya has done this on purpose so you would need either their own IVR or have to buy a MAP-D card and get it via CTI. The dialogic board I am using is D/300JCT-E1 and the ds1 sits in an Avaya Definity G3r R10. Maybe I could get it to work with CAS signalling but that is a lot of work so I would really need to know if it worked before I set it up.

January 30th, 2004, 10:52 AM	#1 (permalink)
tek Registered User Join Date: Dec 2003 Posts: 114	trunk DNIS is there a way to show the inbound DNIS coming though a ISDN PRI? Last edited by tek; January 30th, 2004 at 02:10 PM.

December 2nd, 2004, 06:19 AM	#3 (permalink)
MartenKL Join Date: Dec 2004 Posts: 1	Re: trunk DNIs I guess tek is asking for dnis information within the isdn protocol and not as a trace for debugging purposes, I at least have that problem, that the definity won't send DNIS information to my dialogic board. I can even get UUI to work so everything in my protocol settings should be right but I suspect avaya has done this on purpose so you would need either their own IVR or have to buy a MAP-D card and get it via CTI. The dialogic board I am using is D/300JCT-E1 and the ds1 sits in an Avaya Definity G3r R10. Maybe I could get it to work with CAS signalling but that is a lot of work so I would really need to know if it worked before I set it up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
G3siV12 - Trunk Capacity???	nstephens8	Definity Servers	2	September 23rd, 2005 09:26 AM
PRI setup assistance	nfarooqui	Definity Servers	6	August 23rd, 2005 04:25 PM
Trunk to Trunk transfer	liquidvw	Definity Servers	3	May 26th, 2005 09:10 AM
Outgoing Trunk to Trunk transfer	ggde	Definity Servers	10	February 23rd, 2005 05:01 AM
analoge trunk to tunk transfer	mahmoud	IP Office	3	October 20th, 2004 09:49 AM

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)