T1/E1 pinouts for G700

tek · January 16th, 2004, 10:10 AM

Which are the Rx and Tx pins in G700 E1/T1 RJ45 connector? We are in Finland and need to connect the local PSTN (which is 4 wire) to the G700 E1 interface using an RJ45 cable.

Thanks for you help.

nexSIP · January 16th, 2004, 10:40 AM

1,2 and 4,5 for all T1/E1

[EDITED] by bad

fataldata · January 16th, 2004, 10:45 AM

If your using an RJ45 I have always found them on 1,2 and 4,5 in the US.

ahays · January 23rd, 2004, 08:16 AM

Quote:

Originally Posted by tek

Which are the Rx and Tx pins in G700 E1/T1 RJ45 connector? We are in Finland and need to connect the local PSTN (which is 4 wire) to the G700 E1 interface using an RJ45 cable.

This might help. It's a compilation that I put together for the Definity TN464/767/2313 ... but the RJ48C part will be applicable to the G700/MM710.

regs,

.al.

January 16th, 2004, 10:10 AM	#1 (permalink)
tek Registered User Join Date: Dec 2003 Posts: 114	T1/E1 pinouts for G700 Which are the Rx and Tx pins in G700 E1/T1 RJ45 connector? We are in Finland and need to connect the local PSTN (which is 4 wire) to the G700 E1 interface using an RJ45 cable. Thanks for you help.

January 16th, 2004, 10:40 AM	#2 (permalink)
nexSIP Moderator Join Date: Jun 2003 Posts: 527 Blog Entries: 3	Re: T1/E1 pinouts for G700 1,2 and 4,5 for all T1/E1 [EDITED] by bad Last edited by nexSIP; January 16th, 2004 at 10:57 AM.

January 16th, 2004, 10:45 AM	#3 (permalink)
fataldata PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 308	Re: T1/E1 pinouts for G700 If your using an RJ45 I have always found them on 1,2 and 4,5 in the US. __________________ Systems In Use: S8700 CM3.0 and S8710 CM3.1.1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements
PBXtech.info Advertisement	Sponsored links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)