PBXtech.info - View Single Post

dlgouse · May 5th, 2005, 02:59 PM

And the saga continues. The only thought I have come up with at this point is the R6 software doesn't support the TN464's as ISDN-PRI. The telco can loop csu's clean but see nothing coming back from me. I just spent 6 more hours messing with this and am about up to my eyeballs in frustration. One other thing. A status of the signal group shows Level 3 state as manual-out-of-service. I've never seen this before and the maintenance manual is a bit obsucre on what to release. Again, any thoughts would be appreciated.

May 5th, 2005, 02:59 PM	#12 (permalink)
dlgouse PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 52	Re: ISDN PRI Won't come up And the saga continues. The only thought I have come up with at this point is the R6 software doesn't support the TN464's as ISDN-PRI. The telco can loop csu's clean but see nothing coming back from me. I just spent 6 more hours messing with this and am about up to my eyeballs in frustration. One other thing. A status of the signal group shows Level 3 state as manual-out-of-service. I've never seen this before and the maintenance manual is a bit obsucre on what to release. Again, any thoughts would be appreciated.