PBXtech.info - View Single Post

Blah · May 2nd, 2005, 02:59 PM

Anyone have thoughts?

I went to a server.. FTPED tn799dp_f14.bin into the CLAN..

actually here's what I did:

PBX
1) enable filesys download board xxxx ....
successful

PC
1) CD to directory=success
2) FTP <CLAN IP address>
3) login, passowrd=success
4) binary
5) put TN799... =success

PBX
1) list directory board CLAN=can see file
2) cha firmware download
3) input source, target (same board) desination, answer N to schedule, as I wanted this to occur immediately..
4) test firmware download=success..
5) status firmware download.. saw a "P" for pending for about 10 minutes..
6) status firware download .. saw "F" for fail
7) list directory= file still on the board..
8) status board's link="connected"

did I do anything wrong? Was I wrong to type "test firmware download?" I might try this again, but am scared it did not work.. and yes, I have done this before!

May 2nd, 2005, 02:59 PM	#1 (permalink)
Blah PBXtech GOLD 100+ posts Join Date: Dec 2004 Posts: 107	FW Download Failure Anyone have thoughts? I went to a server.. FTPED tn799dp_f14.bin into the CLAN.. actually here's what I did: PBX 1) enable filesys download board xxxx .... successful PC 1) CD to directory=success 2) FTP <CLAN IP address> 3) login, passowrd=success 4) binary 5) put TN799... =success PBX 1) list directory board CLAN=can see file 2) cha firmware download 3) input source, target (same board) desination, answer N to schedule, as I wanted this to occur immediately.. 4) test firmware download=success.. 5) status firmware download.. saw a "P" for pending for about 10 minutes.. 6) status firware download .. saw "F" for fail 7) list directory= file still on the board.. 8) status board's link="connected" did I do anything wrong? Was I wrong to type "test firmware download?" I might try this again, but am scared it did not work.. and yes, I have done this before!