PBXtech.info - View Single Post

MartenKL · December 2nd, 2004, 07:19 AM

I guess tek is asking for dnis information within the isdn protocol and not as a trace for debugging purposes, I at least have that problem, that the definity won't send DNIS information to my dialogic board. I can even get UUI to work so everything in my protocol settings should be right but I suspect avaya has done this on purpose so you would need either their own IVR or have to buy a MAP-D card and get it via CTI. The dialogic board I am using is D/300JCT-E1 and the ds1 sits in an Avaya Definity G3r R10. Maybe I could get it to work with CAS signalling but that is a lot of work so I would really need to know if it worked before I set it up.

December 2nd, 2004, 07:19 AM	#3 (permalink)
MartenKL Join Date: Dec 2004 Posts: 1	Re: trunk DNIs I guess tek is asking for dnis information within the isdn protocol and not as a trace for debugging purposes, I at least have that problem, that the definity won't send DNIS information to my dialogic board. I can even get UUI to work so everything in my protocol settings should be right but I suspect avaya has done this on purpose so you would need either their own IVR or have to buy a MAP-D card and get it via CTI. The dialogic board I am using is D/300JCT-E1 and the ds1 sits in an Avaya Definity G3r R10. Maybe I could get it to work with CAS signalling but that is a lot of work so I would really need to know if it worked before I set it up.