PBXtech.info - View Single Post - AT-X Command

DaveA · August 3rd, 2004, 11:41 AM

It could be that the loader has failed to upgrade.
To re-iterate, if you are going from 1.x to 2.x you MUST go to 1.99 first, to ugrade the loader firmware.
Make sure that the BIN working directory in Manager is set to the folder with the 1.99 403 BIN file in.
1.99 will make all the light flash as mentioned by Gerg above, and the system will not function, other than to now enable an upgrade to 2.x.
Once at 1.99, the do it all again with the working directory set to the folder with the 2.x bin files.

August 3rd, 2004, 11:41 AM	#14 (permalink)
DaveA PBXtech SILVER 25+ posts Join Date: Jul 2004 Posts: 37	Re: AT-X Command It could be that the loader has failed to upgrade. To re-iterate, if you are going from 1.x to 2.x you MUST go to 1.99 first, to ugrade the loader firmware. Make sure that the BIN working directory in Manager is set to the folder with the 1.99 403 BIN file in. 1.99 will make all the light flash as mentioned by Gerg above, and the system will not function, other than to now enable an upgrade to 2.x. Once at 1.99, the do it all again with the working directory set to the folder with the 2.x bin files. __________________ ------------------------------------------------------------------------------------ Click -->UK IP Office Forum. A new UK based IP Office User Group.